posted
I was asked by a friend to make a replica arrow for is den. I was at the WI deer and turkey expo last weekend and picked up some chert stone flakes that will work great for this project.
I used a nice, thin, white piece for the arrowhead.
I made some wood and cooper tools and an antler brow tine to flake away the stone. The leather is to protect my hand as I press the coper tool against the chert. The flakes are sharp.
I started by squaring off the bottom of the flake and then chipped the head to shape.
Lastly I added the grooves to each side that will be used to tie the head to the shaft. This is where I make the most mistakes and break the head.
Next, I used a knife to cut a groove in the end of a wood shaft to accept the stone head.
-------------------- Member: WI Bowhunters Association Member: WI Traditional Archers Member: American Broadhead Collectors Club Member: Sherwood Forest Bowmen Posts: 887 | From: SE WI | Registered: Jan 2007
| IP: Logged |
posted
I will trim away the extra wood after I tie the head on.
To tie the head to the shaft, I use the sinew I save from the loins/backstraps from my deer.
It separates into nice thin threads.
I soaked the sinew threads in cold water to soften and stretch them. While waiting, I stained the wood shaft. The sinew does not really get tied onto the shaft. It is more like wrapping a wet noodle around the shaft. After I put on a few layers, I dried it with a blow dryer (just like I'm sure the early people did). This makes it shrink tight. I then rub the sinew with a block of bees wax to waterproof it so it won't get wet and loosen up.
For the fletching, I went back to the turkey feathers and tied them on.
-------------------- Member: WI Bowhunters Association Member: WI Traditional Archers Member: American Broadhead Collectors Club Member: Sherwood Forest Bowmen Posts: 887 | From: SE WI | Registered: Jan 2007
| IP: Logged |
-------------------- Bernie: "Hunters Are People Too"
Ret'd USMC '53-'72 Disbanded Hubert Archers (Treasurer) Traditional Bow Shooters of West Virginia (Official Dinosaur Wrangler, Supporter, and Member) TGMM Family of the Bow Posts: 18891 | From: S Coastal NC | Registered: Mar 2003
| IP: Logged |
-------------------- Try to be the person your dog thinks you are :0) TGMM Family of the Bow N.Y. Bowhunters member Posts: 4158 | From: Dansville N.Y. | Registered: Mar 2004
| IP: Logged |
posted
Your photos made it seem like it just happened along like magic. Nice.
-------------------- I see that the Lord is always with me. I will not be shaken, for he is right beside me. No wonder my heart is glad, and my tongue shouts his praises! Posts: 3021 | From: Stroud Township ,PA | Registered: Jan 2006
| IP: Logged |
posted
I used heavy gauge copper wire and brass rods to make the tools.
quote:Originally posted by possumtrot: RGK, nice work! What did you use to make the copper tools? I would really like to get started in flintknapping.. John
-------------------- Member: WI Bowhunters Association Member: WI Traditional Archers Member: American Broadhead Collectors Club Member: Sherwood Forest Bowmen Posts: 887 | From: SE WI | Registered: Jan 2007
| IP: Logged |
UBBFriend: Email this page to someone!
Printer-friendly view of this topic
![[thumbsup]](graemlins/thumbsup.gif)
