posted
I just bought some wood arrow shafts and i would like to know the steps i need to follow and in whch order im not worried about cresting them i just wasnt to seal and stain them what is the best way to do this should i taper the ends first or cut and stain then taper or what any help will be greatly apperciated
-------------------- every mourn brought forth a noble chance, and every chance brought forth a noble knight-wiston churchhill Posts: 260 | From: pacific,missouri | Registered: Apr 2008
| IP: Logged |
mysticguido
***unregistered***
posted
tapering, self nocks both should be done first, Well the first thing after straighting them... anyway it would be like this.
1) straighting shafts 2) cut self nocks 3) Taper shafts 4) sand shafts 5) clean shafts (acid tone,etc,,,) 6) check straightens 7) Stain shafts ( if Your going to do that ) 8) check straightens 9) crest shafts ( If Your going to do that ) 10) check straightens 11) seal shafts 12) check straightens 13) cut to length & taper points 14) Fletch arrows 15) Shoot them
doing stain & sealers.. use as many as you like to stay in weight.... I really just like to whip on some poly 3-5 coats.... in a years time I'll add 2-3 more for touch-ups.... I also check straightness after ever shoot if I'm shooting a lot, if I'm just shooting weekends once a week... Come hunting season... when ever I get a chance..
Take your time, ask questions when you can... The only dumb question, is the one that isn't asked.
IP: Logged |
UBBFriend: Email this page to someone!
Printer-friendly view of this topic
