posted
curiosity got me,i ordered a omp adrondack dlx 50# @ 28" to get me started. they recomend 6 1/4-6 3/4 brace height. i already have 125gr. zwickey heads that i had bought for my nomad stalker,so i will use these. can someone point me in the direction of a good carbon arrow for this bow?i already have easton st excell 400's @31" that i have been using in my recurve as well. will these do ok or do i need to look at something else? (im a big fan golden tip's)
-------------------- well....let's go let the air out'a one! Posts: 132 | From: Dublin,VA. | Registered: Mar 2009
| IP: Logged |
posted
Why don't you try them then if they don't work, figure out why and try something more approprite.
-------------------- “Perfection is such a nuisance that I often regret having cured myself of using tobacco.” - Zola Posts: 645 | From: Uralla, NSW | Registered: Aug 2008
| IP: Logged |
posted
Do you need the 31" length? If not, you could try some Beman ICS Bowhunter 500 shafts. They shoot great out of my 52# Kanati and my 50# Badger recurve. Mine are cut to 29.5" and I'm shooting Zwickey Deltas.
UBBFriend: Email this page to someone!
Printer-friendly view of this topic
