posted
i was surprised to find that my draw is only 26". i'm a big guy at 6'1". this is using my bbo and measuring from the nock groove to the back of the bow. i know amo measuring method is nock groove to throat of of riser plus 1 3/4". even using that method my draw is less than 28". using amo method on the same bow my draw is 26 1/4". if a person were to order a custom bow, how do you figure your draw? does the bowyer tell you how he wants you to measure your draw based on his design? i was just very suprised to find out, that for my size, my draw is that short. don
Posts: 869 | From: buffalo, newyork | Registered: Jun 2004
| IP: Logged |
posted
I measure from bottom of string groove on nock to back of bow.Add 3/4"-1" for arrow length.
Posts: 95 | From: Tennessee | Registered: Dec 2010
| IP: Logged |
mysticguido
***unregistered***
posted
28" back of bow to nock grove.... I'm 5'7"
IP: Logged |
posted
I'm only 5'9" tall, but I've got long arms for my height which makes me a knuckle dragger. With that said, my draw length is 30" to the front of the arrow shelf (farthest from me). I then add 2" of arrow length to keep a razor sharp broadhead from touching the knuckles of my hand that holds the bow out in front of the arrow shelf at full draw.
With a normal bow, not a forward handle or the deep convex handle of a horse bow, it's easy to find your draw length. I measure my draw length to the front of the shelf.
Just take a clothes pin and attach it vertically where the total length of the clothes pin is under your full length arrow shaft about 9" from the tip of the arrow shaft.
As you draw the arrow shaft, when the vertical clothes pin touches the front of the shelf (farthest from you), it will keep sliding forward and stop sliding forward when you come to your anchor point. Then, just measure from the valley of the arrow nock to the clothes pin and that's your draw length. Do it a few times to get a consistent draw length.
Just take a clothes pin and attach it vertically where the total length of the clothes pin is under your full length arrow shaft about 9" from the tip of the arrow shaft.
As you draw the arrow shaft, when the vertical clothes pin touches the front of the shelf (farthest from you), it will keep sliding forward and stop sliding forward when you come to your anchor point. Then, just measure from the valley of the arrow nock to the clothes pin and that's your draw length. Do it a few times to get a consistent draw length.
posted
29 3/4".......I keep my arrows all at 30 1/2".
Winterhawk1960
-------------------- What if you woke up tomorrow, with only what you thanked God for today ??? Posts: 1901 | From: Parkersburg, West Virginia | Registered: Mar 2008
| IP: Logged |
posted
we all have different body types and that is what it comes down to i suppose. night wing, thats the way i measure mine sort of. i draw my bow with an arrow shaft. my wife stands to the side and uses a marker to mark the shaft at the end of the shelf at the back of the bow. i do it several times to make sure it's consistant. i was just suprised to find that it's only 26" and i'm 6'1". but... if i do that with my bear grizzly it will be longer. the one thing that does remain consistant, no matter what bow you use, is the measurement from the nock groove to the deepest part of the grip. for me that is 24 1/2". i usally use my bbo so i measure my draw the way you do. don
Posts: 869 | From: buffalo, newyork | Registered: Jun 2004
| IP: Logged |
posted
don s, I'd sure like to see a picture of you at full draw. 26" is really short for a 6' 1" person. HH artificially shortened his draw to 28" and he was 6'1" too. I'm 6' 2" and use a 29.5" draw. Just saying...
-------------------- 9 H Hill bows 3 David Miller bows 2 Black Widow bows USA Archery, Level 4 NTS Coach Posts: 1417 | From: Grand Rapids, Minnesota | Registered: Feb 2009
| IP: Logged |
posted
I'm 6'0" and draw 31". I don't have especially long arms, but I like to draw deep. My 6'1" brother draws 32". Measured nock groove to back of bow.
Archie
-------------------- "The problem with quotes and other information obtained on the internet is that it is difficult to determine whether that information is genuine." - Abraham Lincoln
66" Black Widow PLX 48# @ 31" 64" Black Widow PMA3 49# & 69# @ 31" Posts: 1077 | From: Illinois | Registered: Oct 2007
| IP: Logged |
posted
30". I like my arrows long in case you have to reach back for a little extra on longer shots. I can make a lot of sizes work, when a charge is on you can't be picky!
Posts: 96 | From: Pennsylvania | Registered: Sep 2010
| IP: Logged |
posted
I'm 6'2" and only draw 27". It used to drive me nuts thinking I needed to change my anchor and I would get more power out of a longer draw. Now I dont worry bout it. I tend to lean into the shot but I'm consistant that way.
-------------------- I'm just a guy on a buffalo. Posts: 1843 | From: S. Indiana | Registered: Jan 2011
| IP: Logged |
posted
I'm a short guy, only 5' 8", and my draw lenght is 29". Measured from the groove of the nock to the back of the riser. The question is not how tall you are, but your wingspan. My wingspan is 72", it's longer than may height.
quote:Originally posted by Rob W.: I'm 6'2" and only draw 27". It used to drive me nuts thinking I needed to change my anchor and I would get more power out of a longer draw. Now I dont worry bout it. I tend to lean into the shot but I'm consistant that way.
i was always wondering what i was doing wrong and thinking mine should be longer. i have tried different anchor points in an effort to increase my draw. i can do it but it's uncomfortable and my accuracy suffers. i think my accuracy has suffered long enough. don
Posts: 869 | From: buffalo, newyork | Registered: Jun 2004
| IP: Logged |
UBBFriend: Email this page to someone!
Printer-friendly view of this topic
