posted
Can you guys point me in the right direction. I am looking for some aluminum arrows to buy. I would like the cut fletched and everything. Since I am new to traditional I need to talk to someone that knows what they are doing. I am also needing some arrows for my kids to shoot out of a smaller bow and don't know what size to get. Thanks for any help provided.
Posts: 25 | From: Halstead, Ks | Registered: Sep 2010
| IP: Logged |
posted
Some of the sponsors of this site sell cut, fletched, ready-to-shoot arrows. I've gotten some like that from 3Rivers Archery and Kustom King Archery before I learned to make my own.
I believe 3Rivers Archery's website has an aluminum arrow selection chart that may help figure out what spine (stiffness) and length of arrow to get depending on the bow's draw weight at your specific draw length. Easton Arrow's website has one as well. So you need to first figure out your draw length (3Rivers website also has instructions to help you find your draw length). From there, you can try to calculate your draw weight. Once you get those factors figured out, give 3Rivers a call. They should be able to help you figure out the proper spine and length arrow. I believe they also sell "test kit" arrows of different spine.
Hope this helps.
Posts: 197 | From: Texas | Registered: Dec 2009
| IP: Logged |
posted
Suggest you narrow your arrow selections to acceptable options determined by your full draw weight & length as well as any shelf cut parameter such as center cut, etc. If you don't know, use a full length shaft. Put a clothespin on the shaft past the shelf of the bow. Draw full to a comfortable spot with your index finger in the corner of your mouth. The clothespin will slide down the shaft & stop at your shelf at your full draw. Measure from the valley of the plastic nock to the clothespin. Your full draw length. Might want arrows .5" - 1.5" past that point. Reference the draw weight marked on the side of the bow. Every inch past the marked distance will add 2-3# draw weight. Draw length less than marked reduces likewise. Buy arrows spined to handle the full draw weight. Easton has charts available. PM for more. Huge arrow help in the archives. Can be overwhelming. Hope this helps.
-------------------- Buddy Bell
Trad is 60% mental & about 40% mental. Posts: 4460 | From: Texas | Registered: Oct 2007
| IP: Logged |
posted
Follow what straitarra said. THEN - Phone 3 Rivers Archery at 866-732-8783 or Kustom King Archery at 877-LONGBOW. Give them all of the details and they will set you up with something that will work well. Joe
Posts: 1195 | From: North Carolina | Registered: Mar 2008
| IP: Logged |
posted
wat53, post your specs as far as bow weight and type, draw length, etc.. and someone will be able to help you out. As far as the kids are concerned my younger daughter is shooting 1214 aluminums or 1/4" birch and raminwood with a 14# draw and my older daughters and wife shoot 1512, 1616, 1713 aluminums or 30-35# POC with 20-25# draws. They all like to make arrows and have fun trying different types and spines to see what works. Hope this helps, good luck....Shawn PS: post a WTB ad on the arrow classifieds and it may turn up something
Posts: 319 | From: New Mexico | Registered: Jul 2010
| IP: Logged |
posted
When I need help with any traditional equipment I refer to the "GOOD BOOK", that is, "THE TRADITIONAL BOWHUNTERS HANDBOOK" by TJ Conrads. The book is well worth the $20.00 price.
-------------------- "When in Rome, DO Rome"
Black Widow PSA X Bob Lee Hunter takedown 2 Bear Kodiak Mags Bear Kodiak Hunter Bear Grizzly Posts: 351 | From: Michigan | Registered: Nov 2009
| IP: Logged |
posted
Any of the sponsors that sell arrows should be able to narrow it down. If you want a product recommendation then I think that Easton XX75 Camo Hunters are the product as for as cost versus quality. Three generations of archers in my family have used them to complete satisfaction.
-------------------- A&H ACS CX 61#@28in Check out the Sponsor Classifieds for available turkey calls and knives Posts: 741 | From: Lithia FL | Registered: Mar 2010
| IP: Logged |
posted
I get all of my aluminum shafting from Bowhunters Superstore in Wellsville, Pennsylvania. I do so because this place stocks the 2212 aluminum shafting which I shoot. None of the sponsors here on TG carry the 2212 size.
They do have a website with a toll free number and they can provide you with arrow info for your children.
Bowhunters Superstore also carries many hard to find aluminum shafting/arrows such as Jazz 1214, 1413, 1416, 1516, 1616, 1716 and 1816. Good aluminum sizes for children.
UBBFriend: Email this page to someone!
Printer-friendly view of this topic
![[thumbsup]](graemlins/thumbsup.gif)
