posted
Here's a pictorial I put together showing a Cow Elk Call I made from Elk antler for my Elk hunt last September..... It worked out pretty good and passed the field test..... i.e it didn't scare any Elk and kept a couple around for a bit looking for a lost cow..... http://bowyersworkshop.com/gamecalls.htm
You could play around with different reed designs and get a predator call without too much trouble... Terry
-------------------- "The reward of a thing well done is to have done it.".. Ralph Waldo Emerson Posts: 2681 | From: Mesa, AZ | Registered: Mar 2003
| IP: Logged |
posted
Cool stuff Terry! I've always favored the "open reed" type calls for all my varmit calling.Easier to vary the sounds and pitches.
Curious as to were you get the reed material?
-------------------- (Enny o yuns know ware thu heart o a stumpytail izz??) Posts: 4781 | From: Hickory co.Mo. | Registered: Mar 2003
| IP: Logged |
Roughcountry
Contributing Member 2006
Member # 2496
posted
Thanks Terry I used a cow horn and made a coyote howler pretty much the same way but left the whole horn there for volume. Never thought about a cow call.
Posts: 2048 | From: Eastern Oregon | Registered: Jan 2004
| IP: Logged |
posted
Welllll if that isn't just cool beans! neat Terry.
-------------------- There is always someone that knows more than you, and someone that knows less than you, so you can always learn and you can always teach Posts: 12891 | From: Cincinnati, Ohio | Registered: Mar 2003
| IP: Logged |
posted
Thanks guys.... Timo.... I picked a sheet of Mylar up at Michaels... A local craft store...... I use it mainly to make some stencils for the Indian designs on the painted bows I do and noticed it looked a lot like the reeds in a commercial Elk call I had..... I thought I'd give it a try and darned if it didn't work....... Fletcher you could use anything for the body.... Any kind of antler , wood..... etc...... It was cool using it and packing a selfbow.....seemed fitting..... Terry
-------------------- "The reward of a thing well done is to have done it.".. Ralph Waldo Emerson Posts: 2681 | From: Mesa, AZ | Registered: Mar 2003
| IP: Logged |
I use plastic milk jugs for reed material. Cut it out and if its a little low pitched, use a sanding block to thin it down a little. Generally you don't have to sand and can modify your bite to get tone. An old credit card will also work for a reed.
Posts: 476 | From: MONTANA | Registered: Apr 2003
| IP: Logged |
posted
Taran....your top lip is on the reed in front of the rubber..... By changing the location of your lip and varying the pressure you can raise or lower the pitch of your sound..... Terry
-------------------- "The reward of a thing well done is to have done it.".. Ralph Waldo Emerson Posts: 2681 | From: Mesa, AZ | Registered: Mar 2003
| IP: Logged |