posted
One final note, any of the veneers that are in the 1-3/4" width can be ground to 1-1/2". I'll be glad to grind them for you at no additional cost.
Troy
-------------------- Troy D. Breeding
Retirement ain't what it's cracked up to be. Posts: 1174 | From: Quincy, OH | Registered: Mar 2003
| IP: Logged |
posted
I'm adding in afew more sets of Birdseye Maple.
These are from different stock and have a much different look. If you like the looks of Birdseye Maple, but don't really care for the light colored wood then be sure and check out some of these sets. Several are heartwood Birdseye and are much darker. I'm including a close up pic with each set as well.
Birdseye Maple 36" x 1-3/4" x .030" $30.00 a set plus shipping CUS only
-------------------- Troy D. Breeding
Retirement ain't what it's cracked up to be. Posts: 1174 | From: Quincy, OH | Registered: Mar 2003
| IP: Logged |
posted
Just so no one would feel left out I even ran some in 1-1/2"
Actionboo Taper Laminations 36" x 1-1/2" $12.00 pr plus shipping CUS only 2pr each of .002" taper laminations in .115" and .100" thickness. Only 1pr in the .105" thickness
Note: The pic shows .125 and .120... Currently I'm SOLD OUT of these thickness
(Side note) one pair of the .100" tapers had a mishap in the grinder and are only 34" in length.
Actionboo Parallel Laminations 36" x 1-1/2" 3pr each parallels in .060", and .050" 4pr each parallels in .055" 5pr each parallels laminations in .045" and .040"
-------------------- Troy D. Breeding
Retirement ain't what it's cracked up to be. Posts: 1174 | From: Quincy, OH | Registered: Mar 2003
| IP: Logged |
posted
Lastly I pulled out a a few pieces of Maple. This for many is considered the "good ol' stand by core material".
Maple Parallel Laminations 36" x 1-3/4" $8.00pr plus shipping CUS only 3pr each in .060" and .050" 4pr each in .055" and .045" 2pr each in .040" 1pr in .033" (yep, one time too many through the sander)
-------------------- Troy D. Breeding
Retirement ain't what it's cracked up to be. Posts: 1174 | From: Quincy, OH | Registered: Mar 2003
| IP: Logged |
posted
I have three sets of the Spalted Black Walnut remaining. As you can see these are not spalted the full length of the veneers. However, if used in say takedown limb I think they would be very sharp. Atleast you could say you have something different to everyone else.
Spalted Black Walnut veneers 1-3/4" x 36" x .030" $30.00 for a set of four veneers plus shipping to CUS only
As with any wood, sometimes the features play out. This set ended up with ony three veneers showing spalting. I add a solid walnut veneer to it to make a full set.
Mixed set of Spalted and solid walnut 1-3/4" x 36" x .030" $20.00 for this set plus shipping to CUS only
-------------------- Troy D. Breeding
Retirement ain't what it's cracked up to be. Posts: 1174 | From: Quincy, OH | Registered: Mar 2003
| IP: Logged |
posted
This is something different that you want find just anywhere. If you like curly woods take a good look.
Curly Hickory 1-3/4" x 36" x .030" $25.00 for the set of four veneers plus shipping in the CUS only.
I'll be adding several more sets of the curly hickory in time. Right now I'm back logged in grinding veneers that I already have cut and ready to grind.
-------------------- Troy D. Breeding
Retirement ain't what it's cracked up to be. Posts: 1174 | From: Quincy, OH | Registered: Mar 2003
| IP: Logged |
posted
I've had request for sometime now about American Elm. Well here it is. I'll be showing two pics of each set. The feathering between the anual growth rigs is better on the ends than in the middle, but still they really look great. Used natural or stained, these veneers will make your next bow a show stopper.
Ameriacn Elm 1-3/4" x 36" x .030" $20.00 for a set of four veneer or $10.00 for the single pair.
-------------------- Troy D. Breeding
Retirement ain't what it's cracked up to be. Posts: 1174 | From: Quincy, OH | Registered: Mar 2003
| IP: Logged |
UBBFriend: Email this page to someone!
Printer-friendly view of this topic
