Trad Gang
Main Boards => The Shooters FORM Board => Topic started by: Mr Green 740 on February 05, 2007, 09:00:00 PM
-
I recently decided to switch from shooting wensel woodsman heads because I absolutely hate to sharpen them and i'm looking for a 150 grain screw in broadhead and i'm not having much luck.The only one i've found so far is the razorcap design. The reason I need the 150 grain is so I can use the arrows I already have so i'll have the correct spine. I like 3 or 4 blade designs and I was looking for some help.
-
You might also consider a screw-in adapter and glue-on broadheads.
I'm guessing that "hate to sharpen them" is a three-blade complaint; is that right? There seems to be a lot of variety when it comes to two-blade glue-on broadheads. ACE, Magnus, and Zwickey offer quite a few running from 100 to 125 gr. Adapters run from 26 to 42 gr, depending on diameter and length.
-
A 125 grn Grizzly on an aluminum adapter will give you about what you're looking for weight wise, but then you're back into sharpening. I find this head easy to sharpen, but some folks have trouble with it. There are a bunch of other brands that will make that weight for you and I'm sure others who favor them will post.
-
If you don't like sharpening then razorcaps are your ticket, just replace the blade cartridge. Otherwise JimmyDee has got it for two blades, you could use a lansky sharpener for these.
-
I'll trade you off your WW's for 4 blade Zwickey Deltas that have been mounted previously but are unsharpened.
-
Sent PM.
Jim