Trad Gang

Main Boards => The Shooters FORM Board => Topic started by: CAC on November 11, 2007, 07:24:00 PM

Title: Spine help.
Post by: CAC on November 11, 2007, 07:24:00 PM

I need to find some new arrows. My setup currently is a 55lb lb (bear montana) 30" 2018 w/125gr tip. Shoots good. I would like a combo with carbons and either 50gr or 100gr brass inserts and 125gr tip. I've tried the CE 45/70 terminators, but they will only shoot well uncut full length. Any ideas on a 30" shaft that may work?

Thanks,

Chris

Title: Re: Spine help.
Post by: Scott J. Williams on November 11, 2007, 07:29:00 PM

I might suggest Grizzly Stiks, the Sitka,or Alaskan.  The Alaskan comes with Brass inserts when pruchased from Alaskan Archery Supply.  I have a 2 dozen Alaskans for me and a Dozen Sitkas for my girl.  We both love them, they will most likely tune for  you just using the regular inserts when shooting 145 or heavier point.

Title: Re: Spine help.
Post by: crandog on November 15, 2007, 08:14:00 AM

Maybe give the cx heitage 150's a shot.  Pardon the pun.

Title: Re: Spine help.
Post by: Shawn Leonard on November 15, 2007, 10:22:00 AM

I would say the Heritage 150 cut to 30"s with 200-225 up front would fly well for ya. You will have to experiment a bit with point weight. Shawn

Title: Re: Spine help.
Post by: ISP 5353 on November 25, 2007, 12:47:00 PM

Goldtip 35/55s should work with the inserts.

Title: Re: Spine help.
Post by: twotimer on November 25, 2007, 01:52:00 PM

goldtip 35/55s with some 20 and 50 grain weights that screw into the back of the insert.you should be able to work up a combo with them.  :thumbsup: