Trad Gang

Main Boards => The Shooters FORM Board => Topic started by: Cecil on February 23, 2009, 05:36:00 PM

Title: 35# set ups for 3d
Post by: Cecil on February 23, 2009, 05:36:00 PM

Anyone use one around 35# and what is your set up? arrows points, fps any info thanks.

Title: Re: 35# set ups for 3d
Post by: seany916 on February 23, 2009, 08:43:00 PM

What kind of bow are you shooting?

Draw length?

Is that 35# @ 28" (some bows are marked at other draw lengths)

What kind of string are you using?

Brace height?

Title: Re: 35# set ups for 3d
Post by: Skinny Little Runt on February 23, 2009, 09:11:00 PM

Cecil, I target shoot lite wt because they're already dead! If you can get the arrow there and have it stick, thats a good setup. Here's one of mine. Das Elite(21'riser) with Winex limbs pulling 32# @ 27.5" true draw. Arrows for 30yds and under are ACC 328, full length w/145points.
3 fletch, 4.5' shields, total wt 423gs.
Gap shooting, point on is 30yds. Speed,I havent checked, maybe 150fps.
Last indoor 3D, 300 point total, I shot 235. Not bad for a kid.%>)
Remember you can shoot 100yds with 38#s easy.