Trad Gang
Main Boards => The Shooters FORM Board => Topic started by: bmb on June 29, 2009, 11:15:00 PM
-
my hoyt gamemaster2 shoots 2018s fine...paper tune perfect...well i paper tuned some beman ics 400's full length. they showed a hair weak....i mean barely...i figured the fletching would stiffen them up. well i now consistantly shoot right. im a right hand shooter, the bow is setup to shoot off the shelf. what gives??
-
I'm assuming you mean that your 2018s shoot where you want and your bemans shoot to the right? I would shoot them mixed together to make sure its not a form issue. Are you wanting both sets of arrows to shoot the same? If so you may need to lower point weight on your beamans or cut them off a little bit at a time to stiffen. I personally would pick one arrow or the other and tune them to shoot bh and fp where I pointed the bow.
Good luck
-
well i gap shoot and of course the gaps are different with different arrows....so i can aim at the bulleye and it will always hit to the right. like i said though they paper tune fine....could it be that the carbons are skinnier and i have to build out the sideplate??
-
Yes, you could adjust centershot with the sideplate. That is what I would do unless I intended to continue shooting the 2018's.
-
i think thats it because the hoyts are cut so far past center. i had to build it out alot for the 2018s...so i could imagine the carbons would need it to ...since they are skinnier
-
What is your feather position? Will changing it make a difference?
-
tried that...and nothing changed. and i was looking at the center shot with a 2018 sitting on the string and the 2018s are almost centered, just a hair to the left of the string when looking from behind the bow. the bemans are dead centered.
-
well i shot the bow last night. shooting it straight versus shooting canted....it shot fine. what gives??