Trad Gang

Main Boards => The Shooters FORM Board => Topic started by: wisconsinteacher on March 27, 2010, 04:27:00 PM

Title: FormMaster issue
Post by: wisconsinteacher on March 27, 2010, 04:27:00 PM
I made a formmaster today but am having an issue with it.  When I release the bow string the formmaster string drags across my face and does not feel well.  I have the cord below the nock point and am shooting three under.
Title: Re: FormMaster issue
Post by: snag on March 27, 2010, 04:36:00 PM
There should be a little freeplay in the cord...about an inch or two. It might be your alignment that is causing the problem. You might be plucking the string in anticipation and this throws the string off course...i.e. into your face...OUCH!
Title: Re: FormMaster issue
Post by: wisconsinteacher on March 27, 2010, 04:39:00 PM
When I put my fingers on the string there is about an inch of slack.  I will keep working on it.  Maybe it is my face alignment and my fat face getting in the way.
Title: Re: FormMaster issue
Post by: snag on March 27, 2010, 04:43:00 PM
Do you cant your bow? I find that if I cant my bow at about 1-2 o'clock then I never get string rash.
Title: Re: FormMaster issue
Post by: wisconsinteacher on March 27, 2010, 04:50:00 PM
Well I just made it about an inch longer and shot.  Wow that one hurt.  I do cant my bow, it must be my head alignment.  When I shoot, my bow arm does not move much and I do not collaps on the shot.  I am happy I did not spend money on this face hurting tool. lol.
Title: Re: FormMaster issue
Post by: lpcjon2 on March 27, 2010, 04:59:00 PM
http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=004717#000000
maybe this will help
Title: Re: FormMaster issue
Post by: JRY309 on March 27, 2010, 05:26:00 PM
A safety tip you should wear some safety glasses incase the formaster string snaps and whips back hitting you in the eye.If you buy the formaster they recommend safety glasses when using it.
Title: Re: FormMaster issue
Post by: wisconsinteacher on March 28, 2010, 10:12:00 AM
lpcjon2, I did read that page and that is where I got the directions for the formmaster.  Thanks JRY309 for the safety tip.