Trad Gang
Main Boards => The Shooters FORM Board => Topic started by: gringol on February 17, 2012, 11:01:00 AM
-
I shot a video of my form yesterday and noticed my bow arm jerks downward after the release. Unfortunately I'm having a little trouble getting the the footage off the camera. So, without seeing the video, can you think of any ways to correct this? My gut says I have some kind of alignment problem, I just don't know what or how to correct it. From the side my alignment looks ok, string arm and arrow line up...
-
Would really need to see the video...if you are properly aligned...good follow through is automatic.
-
I'm thinking the shoulders aren't square (aligned left of target)...That doesn't really show in the video anyway. Could that throw the bow downward? It seems like it would throw it left...
I'll get that camera talking to the computer one of these days...
-
One thing that could cause your problem is if you are jerking the bowstring up on release, rather than pulling straight back, which would cause the opposite reaction at the front end of the bow. This would typically result in low misses, unless you're doing this so consistently that the "low misses" become the new normal.
I typically have the opposite problem. Sometimes I'll give a peculiar little downward jerk on the string on release, which results in a high miss. It took me a long time to realize what I was doing to cause the high misses. Actually, when I was in the middle of a particularly frustrating time of missing and not knowing why, a shooting buddy commented to me that my string hand was coming down on release rather than moving backwards, and that made the light go on.
-
Depends on how you film....could film overhead from the rear.