Trad Gang

Main Boards => The Shooters FORM Board => Topic started by: nhbuck1 on July 24, 2016, 12:40:00 PM

Title: bareshaft question
Post by: nhbuck1 on July 24, 2016, 12:40:00 PM
dl yopu guys tune your arrows based on bareshaft flight or on where they impact?
Title: Re: bareshaft question
Post by: elkhunter45 on July 24, 2016, 05:11:00 PM
I personally checked tune for both. A correct spine deflection and nock height should impact close with bareshaft and fletched arrow. At least it does on mine. I can hit bullseye at 20 yds with both and my bareshaft flies pretty straight. Not perfect, but good enough for me. I only have one bow, so I am not the expert some are. I have shot trad for 36 years, but I am a relative newcomer to this tuning stuff. I shot wood arrows exclusively until just last month.
Title: Re: bareshaft question
Post by: nhbuck1 on July 24, 2016, 06:02:00 PM
my fletched arrow keep impacting right on where im  looking, bob lee 54 at 28 inch draw which i have 30 inch trad only 400 spine with 145 grain heads fly like darts for bareshaft, idk why im shooting all over with this bow especially to the right
Title: Re: bareshaft question
Post by: katman on July 24, 2016, 07:00:00 PM
Does the bare shaft also hit right?
Title: Re: bareshaft question
Post by: nhbuck1 on July 24, 2016, 07:14:00 PM
idk my arrows are all over the place, mostly shooting high and right with fletched, seems i shoot better with the bareshafts seems weird but i do
Title: Re: bareshaft question
Post by: on July 26, 2016, 08:33:00 AM
I use bare shaft and arrow impact.  Starting at about 10 yards, I get immediate indication of what's going on and make adjustments as I move back. By the time I get to 25 yards they're shooting better than I can.