Trad Gang
Main Boards => Trad History/Collecting => Topic started by: razorsharptokill on October 07, 2005, 01:49:00 AM
-
I've got an old quiver that is made of metal and has a leather tip protector. It has two thin metal rods along each side. It attaches to a bow with a screw at the bottom and a notch and screw at the top? It is brown in color. Anyone tell me about it?
-
Here is a pic of it.
http://img.photobucket.com/albums/v42/keyman/Stickbow.jpg
-
It is one of the first series of the Bear bow quiver. The first ones only held four arrows , later they held either four or eight. Bear pioneered the bow quiver.
Depending on what year it is, it may have decent collectors value.
Later. they came out with the double spring arm model,then the sigle spring and screw down (converta-quiver) then the double screw down which is still made today.
The old ones are brown,like yours. After taht all are green.
-
First Bear bow quiver was what is normally called the scabbard, no metal on the hood. Leather stretched over the wires and held three arrows. This one the brown leather top came second. The first ones of the leather top only held three arrows too, but quickly added the fourth. The scabbard was patented in 1949. Not sure when the leather top came on, early 50's?
-
Thank you for the help. Does a quiver affect a recurves accuracy?
-
Thats a loaded question! Some would not shoot a bow without one, others find them a real problem. My experience has been that a firmly attached, quiet bow quiver adds a little stability weight. Problem being many of these older quivers were hard to keep quiet. There really isn't any comparison between what bow quivers started out as and what they have evolved into, in my opinion. CKruse
-
The quiver has some effect on how the bow shoots. My experience was to put the quiver on and learn to shoot the bow that way. Some guys put the quiver on and take it off in the stand. But what happens if you get a shot opportunity while it is still on. Best to learn one way and stick with that.
Once I got acustomed to how my bow shoots with the quiver on I never had a problem, unless I tried shooting with it off. However, that is just me. Others may tell you different.