Trad Gang

Main Boards => Trad History/Collecting => Topic started by: trubltrubl on July 09, 2014, 01:05:00 PM

Title: Bear A mag handle
Post by: trubltrubl on July 09, 2014, 01:05:00 PM

just bought my first A magnseium BEAR riser with 1L handle..it is loose..what is the best way to secure the handle..not permanently..

thanks guys

Title: Re: Bear A mag handle
Post by: 4runr on July 09, 2014, 01:40:00 PM

Silicone caulk.

Title: Re: Bear A mag handle
Post by: Kip on July 11, 2014, 05:36:00 PM

I used double side tape on mine.Seems to be holding well.Kip

Title: Re: Bear A mag handle
Post by: smokin joe on July 11, 2014, 06:00:00 PM

I like double face tape too.

Title: Re: Bear A mag handle
Post by: Larry m on July 11, 2014, 06:07:00 PM

I actually put a piece of velcro (peel and stick like tape) in mine. Picked that up from a guy off here previously and it works great!!

Title: Re: Bear A mag handle
Post by: Horney Toad on July 11, 2014, 07:31:00 PM

I used barge cement and wrapped some string around the handle to hold it tight while it dried.