Trad Gang

Main Boards => SPONSOR'S CLASSIFIEDS => Topic started by: Emmons on March 25, 2010, 01:32:00 PM

Title: Emmons Custom Knives
Post by: Emmons on March 25, 2010, 01:32:00 PM

Now that I have had some time in the shop, I'm offering the following knives forsale.  I accept payment from Paypal or Money orders.  As always feel free to contact me via PM's or at [email protected].

Thank you,

James

3-1/2” Hunter
4” blade with 3-1/2” cutting edge
8-3/4” Overall Length
1” Blade height and 3/16” thick at the ricasso
O1 Tool Steel Heat Treated to RC58-59
800 grit hand rubbed blade finish
Stabilized Maple Burl handle with black and white spacers
416 Stainless guard and pin
8-9 oz Leather Sheath
"SOLD"
         (http://i12.photobucket.com/albums/a222/JPStangs/MapleBurlOverall.jpg) (http://s12.photobucket.com/albums/a222/JPStangs/?action=view¤t=MapleBurlOverall.jpg)

         (http://i12.photobucket.com/albums/a222/JPStangs/MapleBurlHandle.jpg) (http://s12.photobucket.com/albums/a222/JPStangs/?action=view¤t=MapleBurlHandle.jpg)

         (http://i12.photobucket.com/albums/a222/JPStangs/MapleBurlSheathed.jpg) (http://s12.photobucket.com/albums/a222/JPStangs/?action=view¤t=MapleBurlSheathed.jpg)


3-1/2” Every Day Carry
4-1/2” blade with 3-3/4” cutting edge
8-1/2” Overall Length
1-1/8” Blade height and 5/32” thick at the ricasso
O1 Tool Steel Heat Treated to RC58-59
800 grit hand rubbed blade finish
Black Linen Micarta handle
416 Stainless pins
8-9 oz Leather Mutli draw sheath
"SOLD" shipping
         (http://i12.photobucket.com/albums/a222/JPStangs/EDCOverall.jpg) (http://s12.photobucket.com/albums/a222/JPStangs/?action=view¤t=EDCOverall.jpg)

         (http://i12.photobucket.com/albums/a222/JPStangs/EDCHandle.jpg) (http://s12.photobucket.com/albums/a222/JPStangs/?action=view¤t=EDCHandle.jpg)

         (http://i12.photobucket.com/albums/a222/JPStangs/EDCSheathed.jpg) (http://s12.photobucket.com/albums/a222/JPStangs/?action=view¤t=EDCSheathed.jpg)

         (http://i12.photobucket.com/albums/a222/JPStangs/EDCBack.jpg) (http://s12.photobucket.com/albums/a222/JPStangs/?action=view¤t=EDCBack.jpg)

Title: Re: Emmons Custom Knives
Post by: Emmons on March 25, 2010, 01:36:00 PM

5” Hunter
5-1/2” blade with 5” cutting edge
10-1/2” Overall Length
1-1/4” Blade height and 3/16” thick at the ricasso
O1 Tool Steel Heat Treated to RC58-59
800 grit hand rubbed blade finish
Stabilized Black Ash handle with black and 410 Stainless spacers
416 Stainless guard and pin
8-9oz Leather Sheath
**SOLD**
       (http://i12.photobucket.com/albums/a222/JPStangs/BlackAshOverall.jpg) (http://s12.photobucket.com/albums/a222/JPStangs/?action=view¤t=BlackAshOverall.jpg)

       (http://i12.photobucket.com/albums/a222/JPStangs/BlackAshHandle.jpg) (http://s12.photobucket.com/albums/a222/JPStangs/?action=view¤t=BlackAshHandle.jpg)

       (http://i12.photobucket.com/albums/a222/JPStangs/BlackAshSheathed.jpg) (http://s12.photobucket.com/albums/a222/JPStangs/?action=view¤t=BlackAshSheathed.jpg)

4-1/2” Hunter
5” blade with 4-1/2” cutting edge
10” Overall Length
1” Blade height and 3/16” thick at the ricasso
O1 Tool Steel Heat Treated to RC58-59
800 grit hand rubbed blade finish
African Blackwood handle with black, red, and white spacers
Germany Silver guard and pin
8-9oz Leather sheath
"SOLD"
       (http://i12.photobucket.com/albums/a222/JPStangs/BlackAfricanOverall.jpg) (http://s12.photobucket.com/albums/a222/JPStangs/?action=view¤t=BlackAfricanOverall.jpg)

       (http://i12.photobucket.com/albums/a222/JPStangs/BlackAfricanHandle.jpg) (http://s12.photobucket.com/albums/a222/JPStangs/?action=view¤t=BlackAfricanHandle.jpg)

       (http://i12.photobucket.com/albums/a222/JPStangs/BlackAfricanSheathed.jpg) (http://s12.photobucket.com/albums/a222/JPStangs/?action=view¤t=BlackAfricanSheathed.jpg)

Title: Re: Emmons Custom Knives
Post by: Emmons on March 25, 2010, 01:41:00 PM

5” Hunter
5-1/2” blade with 5” cutting edge
10-1/2” Overall Length
1-1/4” Blade height and 3/16” thick at the ricasso
O1 Tool Steel Heat Treated to RC58-59
800 grit hand rubbed blade finish
Flaming Crotch Walnut Handle with white spacer
Germany Silver guard and pins.
8-9oz Leather sheath
"SOLD"
      (http://i12.photobucket.com/albums/a222/JPStangs/WalnutOverall.jpg) (http://s12.photobucket.com/albums/a222/JPStangs/?action=view¤t=WalnutOverall.jpg)

      (http://i12.photobucket.com/albums/a222/JPStangs/WalnutHandle.jpg) (http://s12.photobucket.com/albums/a222/JPStangs/?action=view¤t=WalnutHandle.jpg)

      (http://i12.photobucket.com/albums/a222/JPStangs/WalnutSheathed.jpg) (http://s12.photobucket.com/albums/a222/JPStangs/?action=view¤t=WalnutSheathed.jpg)

7” Bowie
7-1/2” blade with 7” cutting edge
13” Overall Length
1-1/2” Blade height and 3/16” thick at the ricasso
O1 Tool Steel Heat Treated to RC58-59
800 grit hand rubbed blade finish
Desert Ironwood Handle
416 Stainless guard, ferrule, and pins
8-9oz Leather 2 part sheath
"SOLD"
      (http://i12.photobucket.com/albums/a222/JPStangs/BowieOverall.jpg) (http://s12.photobucket.com/albums/a222/JPStangs/?action=view¤t=BowieOverall.jpg)

      (http://i12.photobucket.com/albums/a222/JPStangs/BowieHandle.jpg) (http://s12.photobucket.com/albums/a222/JPStangs/?action=view¤t=BowieHandle.jpg)

      (http://i12.photobucket.com/albums/a222/JPStangs/BowieSheathed.jpg) (http://s12.photobucket.com/albums/a222/JPStangs/?action=view¤t=BowieSheathed.jpg)

      (http://i12.photobucket.com/albums/a222/JPStangs/BowieDisassembled.jpg) (http://s12.photobucket.com/albums/a222/JPStangs/?action=view¤t=BowieDisassembled.jpg)

Title: Re: Emmons Custom Knives
Post by: 2treks on March 25, 2010, 09:42:00 PM

Nice looking Knives James.

Title: Re: Emmons Custom Knives
Post by: sticshooter on March 26, 2010, 11:59:00 AM

STUNNING!<><

Title: Re: Emmons Custom Knives
Post by: Emmons on March 26, 2010, 01:47:00 PM

Thank you both for the kind words!!

Title: Re: Emmons Custom Knives
Post by: Emmons on April 08, 2010, 02:00:00 PM

TTT for the reduction and thank you to the trad gangers that have purchased knives from me.

Title: Re: Emmons Custom Knives
Post by: Emmons on May 18, 2010, 10:15:00 AM

All are sold, thank you everyone for your purchases.

Title: Re: Emmons Custom Knives
Post by: Emmons on July 28, 2010, 10:11:00 AM

It has been a slow summer in the knife making world, but I should have some done to post soon.

Title: Re: Emmons Custom Knives
Post by: Emmons on December 24, 2010, 11:20:00 PM

3" Tapered Tang EDC
3” blade with 2-3/4” cutting edge
6-3/4” Overall Length
7/8” Blade height and 5/32” thick at the ricasso
O1 Tool Steel Heat Treated to RC58-59
800 grit hand rubbed blade finish
Walnut Diamondwood Handle
416 Stainless pins.
8-9oz Leather sheath

"Sold"

     (http://i12.photobucket.com/albums/a222/JPStangs/DiamondwoodEDCOverall.jpg)

     (http://i12.photobucket.com/albums/a222/JPStangs/DiamondwoodEDCHandle.jpg)

     (http://i12.photobucket.com/albums/a222/JPStangs/DiamondwoodEDCTang.jpg)

     (http://i12.photobucket.com/albums/a222/JPStangs/DiamondwoodEDCSheath.jpg)


3" Skinner
3” blade with 2-1/2” cutting edge
6-1/4” Overall Length
1” Blade height and 1/8” thick at the ricasso
CPM-154 Stainless Heat Treated to RC61
800 grit hand rubbed blade finish
Stabilized curly maple handle with red liners
416 Stainless pins
8-9oz boot clip sheath
"SOLD"


     (http://i12.photobucket.com/albums/a222/JPStangs/CPM154EDCOverall2.jpg)

     (http://i12.photobucket.com/albums/a222/JPStangs/CPM154EDCSpacers.jpg)

     (http://i12.photobucket.com/albums/a222/JPStangs/CPM154EDCSheath1.jpg)

    (http://i12.photobucket.com/albums/a222/JPStangs/CPM154EDCSheath2.
)

Title: Re: Emmons Custom Knives
Post by: Emmons on December 24, 2010, 11:31:00 PM

5-1/2" Hunter
5-3/4” blade with 5-1/2” cutting edge
10-3/4” Overall Length
1-1/4” Blade height and 3/16” thick at the ricasso
O1 Tool Steel Heat Treated to RC58-59
600 grit hand rubbed blade finish
Osage orange Handle
416 Stainless pin and thong liner
8-9oz Leather sheath

My logo did not etch properly on this one (see photo) so I am selling it at a greatly reduced price.

"SOLD"

    (http://i12.photobucket.com/albums/a222/JPStangs/OsageHunterOverall.jpg)

    (http://i12.photobucket.com/albums/a222/JPStangs/OsageHunterHandle.jpg)

    (http://i12.photobucket.com/albums/a222/JPStangs/OsageHunterSheath.jpg)

    (http://i12.photobucket.com/albums/a222/JPStangs/OsageHunterLogo.jpg)

4" Hunter
4-1/2” blade with 4” cutting edge
9-1/2” Overall Length
1” Blade height and 3/16” thick at the ricasso
O1 Tool Steel Heat Treated to RC58-59
800 grit hand rubbed blade finish
Cocobola handle with white spacer
Germany Silver guard and pin
8-9oz left handed sheath

"SOLD"

    (http://i12.photobucket.com/albums/a222/JPStangs/CocobolaHunterOverall.jpg)

    (http://i12.photobucket.com/albums/a222/JPStangs/CocobolaHunterHandle.jpg)

    (http://i12.photobucket.com/albums/a222/JPStangs/CocobolaHunterSheath.jpg)

Title: Re: Emmons Custom Knives
Post by: Emmons on December 24, 2010, 11:56:00 PM

5” Hunter
5-1/2” blade with 5” cutting edge
10-1/2” Overall Length
1-1/2” Blade height and 3/16” thick at the ricasso
CPM 3V Heat Treated to RC61
600 grit hand rubbed blade finish
Stabilized Maple Burl Handle
416 Stainless guard, spacer, and pin
Black fiber spacer
8-9oz Leather sheath

"SOLD"

   (http://i12.photobucket.com/albums/a222/JPStangs/3VMapleBurlHunterOverall.jpg)

   (http://i12.photobucket.com/albums/a222/JPStangs/3VMapleBurlHunterHandle.jpg)

   (http://i12.photobucket.com/albums/a222/JPStangs/3VMapleBurlHunterSheath.jpg)

Title: Re: Emmons Custom Knives
Post by: Emmons on January 03, 2011, 09:37:00 AM

6-1/2" O1 Blade HT'ed to RC 58-59 and hand finished to 1200 grit
11-1/2" Overall Length
1-3/8” Blade height and 3/16” thick at the ricasso
Full length false edge
Don Hanson Flaming Walnut handle
416 Stainless oval guard, ferrule, and pins
Black fiber spacers
Hand tooled and stitched 8 oz. 2 piece leather sheath
"SOLD"

    (http://i12.photobucket.com/albums/a222/JPStangs/WalnutFighterSheath1.jpg)

    (http://i12.photobucket.com/albums/a222/JPStangs/WalnutFighterOverall.jpg)

    (http://i12.photobucket.com/albums/a222/JPStangs/WalnutFighterHandle.jpg)

    (http://i12.photobucket.com/albums/a222/JPStangs/WalnutFighterHandleBottom.jpg)

    (http://i12.photobucket.com/albums/a222/JPStangs/WalnutFighterCliip.jpg)

    (http://i12.photobucket.com/albums/a222/JPStangs/WalnutFighterSheath2.jpg)

Title: Re: Emmons Custom Knives
Post by: Emmons on January 21, 2011, 09:08:00 AM

All knives sold!
Thank you everyone for your purchases,

James