Trad Gang
Main Boards => SPONSOR'S CLASSIFIEDS => Topic started by: IdahoCurt on June 04, 2010, 12:16:00 PM
-
I have very nice hand picked,air dried yew at 10% moisture.
Cores are 38"x1 3/4"x5/8"...$50+shipping.
If you have any special needs,want yew to make laminations or anything else please let me know.
PM is the best way to reach me.
Thanks,Curt
-
Here is a picture.
(http://i248.photobucket.com/albums/gg200/idacurt/yewbowcore.jpg)
-
Some glass bow laminations for a fellow trad gang person
(http://i248.photobucket.com/albums/gg200/idacurt/yewlams.jpg)
-
Here are some veneers for a member ground @.030
I can do parallel and tapered (.002/inch) for $20pair +shipping
Just let me know how I can help you
Thanks
(http://i248.photobucket.com/albums/gg200/idacurt/yewveneers.jpg)
-
More options!
I also have Highly figured Myrtle burl and walnut.
This is as good as it gets for figure and will make a unique one of a kind bow.
Parallel or tapered $25pair+ shipping
(http://i248.photobucket.com/albums/gg200/idacurt/myrtlewalnutlams-1.jpg)
-
Curt,
Got home today and waiting for me at the door were the yew cores I ordered from ya. All I can say is thanks, WOW, those are some pretty cores, knot free and just beautiful. Can't wait to start on the bamboo backed yew bow.
Guys, if you want nice wood, Curt is your guy.
-
Rich,
Thanks for the feedback,I'm glad you're happy.Please post a picture when the bow is done.
I decided to also add Bocote to the choices.These are my favorite bow woods and will make unique one of a kind works of art, I will only sell quality to my fellow bowyers!
these are ground to veneer laminations @ $24pair plus shipping,if you require something other than veneers we can work it out.
Thanks,Curt
(no Bocote as of 10/20/10)will be getting more soon.
(http://i248.photobucket.com/albums/gg200/idacurt/Bacotelams.jpg)
-
Curt,
I would like to get a board of each of the following enough to make say 1 GOOD pair of Lams or Veneers.I have some bows in the works plus a close friend of mine builds bows so the bowyers would grind their own Lams or Veneers to their specs.Can you make all of them WIDE enough for Recurve OR Longbow ? I am not a bowyer so if i need to call you do not hesitate to have me do so,I would just need your tel #.
NOTE: I really would like the most FIGURED stuff you have.
VERY MUCH APPRECIATED.
Tom Phillips
10 Bonny Lane
Peru,Ma 01235
- Bocote
- Myrtle
- Walnut
-
Tom,
I will PM you.
Thanks very much,you will be happy!
-
From a recent order to a tradgang member SveinD in norway
"I recently decided to try my hand at laminate bows, and by chance, I saw an ad here in the sponsors classifieds.
After seeing what he had in stock, I started bombarding him with messages and he answered each one with the patience of a rock.
I ordered some beautiful bocote and myrtle, and some yew veneers to have as reserves.
Well yesterday I got the goods, and my are they sweet! They were shipped fast, but thoroughly packed,
which really puts the icing on the cake for a serious dealer.
To my amazement the yew was nearly the prettiest wood in the package, pics in the listings really don't do it justice.
And he even threw in a couple of extra veneers, probably feeling sorry for my high shipping rate
I'd put in some pics here of veneers being used, but Doc says no labor with my bad arm, so it'll have to wait till I'm all healed..
To see pictures check out his listings page in the link below!
http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic&f=70&t=001066#000006
Thanks Curt, we will be doing business in the future I'm sure!"
-SveinD, Norway-
-
ttt
-
Hi all!
just an update,in addition to the usual Yew,figured Walnut and Myrtle burl I have some outstanding tiger Myrtle and also a combination of Walnut/tiger Myrtle with an accent stripe of Yew/bocote.All are ground to .030 and 1 3/4" wide.
Tiger Myrtle
Note: Due to an unseen knot before cutting, these lams are 32" long.I also have a number of lams that look just like this @29"
(Middle lams have alcohol to show grain)
(http://i248.photobucket.com/albums/gg200/idacurt/32myrtle.jpg)
Combination Curly walnut/Tiger Myrtle with accent stripe.
(top lams have alcohol)
(http://i248.photobucket.com/albums/gg200/idacurt/walnutmyrtlelam1.jpg)
Close up of stripe.
(http://i248.photobucket.com/albums/gg200/idacurt/accentwalnutmyrtle.jpg)
Updated pricing is as follows:
Yew parallel/tapered $20pr
Figured Walnut $20pr
Myrtle burl $25pr
Tiger Myrtle $25pr
Combination lams $30pr
Thank you for the support,Curt
-
Pm sent Curt! WOW!!
-
More Myrtle Burl
(http://i248.photobucket.com/albums/gg200/idacurt/myrtleburl1-1.jpg)
-
Curt,cant find a website,can you pm me a phone #...thanks
-
Here are some tiger Myrtle veneers 36"x 1 3/4x .030.
$25pr+ shipping Except for #1 $15 because sap wood runs about 1/3 through veneer.
I have more of these and also cut for recurves 32" long x 1 3/4"x.030
If you have any questions please PM and I will do what I can to help you out.
Thanks,Curt
Edit: All have been sold,if interested please PM me,I have more.
(http://i248.photobucket.com/albums/gg200/idacurt/tigermyrtle1.jpg)
-
Curt PM me a phone number please. I am looking for some Yew
-
Here are some more Myrtle lams just cut up,please contact me for specs and availability
Thanks for the support,you guys are great.
(http://i248.photobucket.com/albums/gg200/idacurt/P4014299.jpg)
(http://i248.photobucket.com/albums/gg200/idacurt/P4014301.jpg)
(http://i248.photobucket.com/albums/gg200/idacurt/P4014302.jpg)
Some bocote
(http://i248.photobucket.com/albums/gg200/idacurt/bocote2.jpg)
(http://i248.photobucket.com/albums/gg200/idacurt/bocote1.jpg)
-
Holy Crap!! :scared: :clapper: Those are awesome!
-
Thanks steadman,I love figured wood!
#'s 1a,2a,4a,1,2,3,4,5 have been sold
Bocote lams are sold
They are $25pr + shipping
Thanks,Curt
-
:campfire: