Trad Gang

Main Boards => PowWow => Topic started by: stripe55 on January 17, 2008, 11:29:00 PM

Title: Howatt-Wing_Browning vintage-brace height
Post by: stripe55 on January 17, 2008, 11:29:00 PM

Santa left the good stuff today and I was hoping to get some help on brace height  with these bows:DH High Speed 54",Browning Mowhawk 54",Wing Red Wing Hunter 58". Thanks for any and all!! John

Title: Re: Howatt-Wing_Browning vintage-brace height
Post by: swampjoe on January 18, 2008, 12:54:00 PM

Hey stripe I had a 58 inch Red Wing Hunter and I had the brace height set at just over 8 inches - your sweet spot might be different, so try a couple of settings in and around there and you should be ok.

Title: Re: Howatt-Wing_Browning vintage-brace height
Post by: joe skipp on January 18, 2008, 02:39:00 PM

My Browning and Howatt were all just a tad over 8". Not sure what the Wing would be but back then most brace heights were roughly the same.