Trad Gang

Main Boards => Hunting Knives and Crafters => Topic started by: Full Quiver on February 10, 2008, 08:55:00 PM

Title: Saw blade steel first knives
Post by: Full Quiver on February 10, 2008, 08:55:00 PM

OK guy's I'm gonna try my hand at this. I tried cutting some blades out of a dull 12" miter saw blade & an industrial hacksaw blade (? maybe). Neither one would drill, especially the hacksaw. I tossed everything to the back of the workbench till I read RGK's post, tried the heat thing with the mapp gas. It worked. I don't know how they will turn out but I'm gonna finish them & put one in for the knife swap. Not being very sharp myself I can't sharpen knives worth a hoot but whoever gets it can put the final edge on I guess. Here's what I've got so far (before drilling).  Don (http://i148.photobucket.com/albums/s11/donwils/First-Knives.gif)

Title: Re: Saw blade steel first knives
Post by: brettlandon on February 10, 2008, 09:22:00 PM

Those blade are real pretty!  :clapper:  

-Brett

Title: Re: Saw blade steel first knives
Post by: RGK on February 10, 2008, 09:27:00 PM

Glad I could help.