Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: scrub-buster on May 15, 2009, 05:14:00 AM

Title: Pin Knots Question
Post by: scrub-buster on May 15, 2009, 05:14:00 AM

I am chasing a ring on an osage stave and I have 2 pin knots.  One in the handle, and one in the fade about an inch apart.  Do I still need to follow the ring above the knots or can I cut through them since they are not flexing much?  The design is for a non bending handle bow.  Also, I am expecting the string in the mail this weekend for my first bow.  I should be able to post pictures of it on Tuesday.

Title: Re: Pin Knots Question
Post by: No-sage on May 15, 2009, 08:44:00 AM

Always follow the ring.

Title: Re: Pin Knots Question
Post by: John Scifres on May 15, 2009, 08:52:00 AM

If it doesn't bend, you don't have to worry about it.  If you think it is going to bend, even a little, then be diligent about keeping them in good shape.