Trad Gang
Main Boards => PowWow => Topic started by: valleysniper on March 06, 2020, 07:56:46 PM
-
My problem is that no matter what I do I can't get rid of knock high in my arrows. I've tried everything, level knock point to 3/4" high, one nock point, 2 nock points. I've wore my favorite plaid hunting jacket, wore a tin foil hat and tapped my left foot ......all to no avail. It seems as though when I shoot recurves I cannot for the life of me get rid of it. Longbows are another thing. I have a Centaur longbow that tuned like a dream. Am I to the point that I should give up and shoot a feather or brush rest ? I am ready to pull my hair out and I don't have much to spare
-
Do you shoot split or 3 under?
-
I shoot split finger. I thought about trying 3 under, actually I tried it alittle. Was like trying to throw a ball left handed when your right handed. Might take a bit. Does anyone think that might help ???
-
The most common cause of nock high when shooting split fingers is pressing down on the nock with the index finger. This causes the shaft to flex down and then spring back into a nock high orientation. Try lowering your string elbow and pulling back such that there is not an excessive pressure on the nock while drawing the bow.
-
Thanks I'll try that. All I know is this is giving me fits. Cant figure out why it's not a problem with my longbow
-
I am pretty sure McDave hit the nail on the head.... I have always shot three under. When I tried split that is exactly what happened. Not that you need to go to 3 under just do what he said and lower that elbow and draw straight back. Even take a second to be sure you dont have that shaft torqued down due to pressure from your top finger or elbow set or both.
-
Well from what a read the answer is simple..you are a Longbow shooter! Can't fight nature..
-
Try shooting cock feather in. Your recurve probably has a wider shelf then your longbows. You may be getting some feather contact by your four o’clock feather on the outside of your shelf, where it passes as the arrow flexes on release. I always rotate my nocks so my four o’clock feather is three o’clock and it makes a big difference for me.
-
I always shot 62" longbow and had no problem shooting split but when I switched to a 58" recurve I couldn't get rid of the nock high no matter what I tried so I switched to 3 under and instantly had better arrow flight. Have recently tuned new arrows and they fly perfectly bareshaft so definitely helped me. Now I just have to get used to the slightly lower impact point at longer distances but that will come with practice
-
Gary, let me know if you fix it. My issue is what mcdave mentioned. I changed my hold hand to make sure more pressure was on the fingers below the arrow nock
-
Great advice from all I was having the same problem and I took some foot powder spray and sprayed the back half of my arrow and found that my nock was to lose so I added a nocking point under the arrow and that took care of my problem.
-
" Try lowering your string elbow and pulling back such that there is not an excessive pressure on the nock while drawing the bow."
I had the same, or similar problem, for a long time. Took me a while to learn to really drop that string arm elbow. Big difference!
-
It sounds like a very very very serious form problem to me why don't you dilm yourself broadside from the drawing arm side and post it
-
I will try to film tomorrow and see what we come up with...Gary
-
https://youtu.be/3j6fcVAZWNU
Start at 5:27 to get to information about nock high problems. Ken Beck provides some really good information.
-
After you film yourself, you might try putting a light coat of powder on your rest and shelf, shot a few times. I have used a small amount of Johnson's baby powder, this will show if anything is hitting during the shot. Secondly, as Ken Beck said, pressure of the top finger, might be a problem. With split finger release, the top two fingers should be pulling the same amount on the string.
-
Well, after taking everyone's advice and fiming myself and looking at some pictures. I see a very serious problem, my elbow was WAY to high and I'm torquing the string at full draw. Apparently laying off of shooting has really hurt my muscle memory. I think I just have to work on it and be conscious of my elbow and hand posit i.p.o on. The high elbow is what probably gave me the bad case of tennis elbow I'm thinking. Thanks everyone for all the help...Gary
-
How much do you cant your bow?
Might be a nock left arrow looking like nock high
-
I really dont cant my bow very much at all. I tuned the arrow with it straight up and down as I was told to by a few guys on here. I really think the elbow issue is giving me the problem. I'm pushing down on the arrow with alot of pressure.
-
If your shelf is wider than the arrow shaft, the nock will strike it and it will register nock high even when properly spines. - Dan Quillian.
-
If your shelf is wider than the arrow shaft, the nock will strike it and it will register nock high even when properly spines. - Dan Quillian.
This doesn't make much sense to me. Almost all arrow shelves are wider than the arrow shaft, but when properly tuned and shot with good form, the bare shaft does not register nock high.
-
I have had this problem before. Try setting nock point at 1/4" and go up 1/16 at a time until good flight. You may be nocking way to high. Also I have found when arrow is way to weak it strikes the side plate and from then on all bets are off.
-
I am shooting my Orion with ACS recurve limbs, 45@ 28 I draw to 29. I am trying to shoot a 340 with 225 up front, side to side arrow spine seems fine, up and down I'm running into the problems I've described. I'm thinking arrow is way to heavy
-
Heavy spines that is....been a long day lol
-
Yikes! I shoot .600 out of most bows up to 48# or so.
-
340 with 225 up front was recommended by the bowyer. I cut some 400's down to 31" with 225 up front seem to shoot way way better. I hope I get this ironed out soon.wanted to bowhunt turkeys this year