Trad Gang
Main Boards => PowWow => Topic started by: Pmringer on November 09, 2020, 08:39:14 AM
-
I had a custom bow made from a bowyer I liked. Waited months and it just doesn't shoot like my previous one from him. In the mean time I tried another bow that I really like and am sticking with it. Can a reasonable price be expected without it being removed. Provided that it isn't painted under the clear coat what is the best way to remove it without damaging the bow so I can sell it?
Thanks
-
I always put clear coat over my lettering, perhaps you bowmaker did as well.
If not and the lettering is acrylic denatured alcohol will take it off. If the lettering is something like a sharpie you could try "Goof-Off" or naphtha.
-
Most bowyers I know put the writing on the bow before doing the finish coats. That protects it. The only ways I know to remove the writing is to sand thru the finish coat, and then reapply, or have the limb/bow refinished.
I’ve never known a name in a bow to substantially reduce the selling value of a bow. If it is “used”, you are not going to get “new” price for it, even if it was never shot at all.
Bisch
-
Oops! Fat fingers!!!!! :biglaugh:
Bisch
-
Good point. I won’t worry about it and just see what I can get out of it. I accept it’ll be a loss for sure. The only saving grace is no wait time. It’s a dandy bow I just can’t shoot this grip anymore after getting used to my temporary bow and injuring my wrist.
-
Some ones name on a used bow just adds to the history of the bow. I always wonder what the person saw while using the bow or did he or she ever miss.....lol !!
-
I would rather buy a used bow with the name still on it than a used bow with a half bungled removal job.
-
I've been through “This is the last bow I’ll ever want” too many times, so I don't get my name on a bow anymore. It's not really that difficult to lightly sand off a name, even if it's under the clear coat. If you can find out what finish the bowyer used, apply a light coat of that over the place you sanded. If you can't find out, find a quality woodworking store, show them the bow, and see what they recommend. I did that to take someone else's name off a bow I bought, and it worked fine; can't tell where the name was removed. Easier than removing a tattoo, for sure!
-
I doubt your name on the bow would be a deal breaker on the resale. Unless your name is BINLADIN or maybe OBAMA it should be fine. I’ve never had my name put on my new bows, the reason is I’m not a fan of all the writing. My bow does have Howard Hills name on it and some guy named Tembo but I still like the bow
-
David Phillips
LOLOLOOLlololol Dude that was funny
-
I would rather buy a used bow with the name still on it than a used bow with a half bungled removal job.
I'm with BAK. I could ignore another guy's name, but not a big splotch in the finish.
-
I only have one used bow with the previous owner's name. It is not clear, but I wish it was. It would be nice to try to find out something about that fellow.
-
My Wes Wallace is used. I left my friends name on the bow. I had it refinished when a limb tip lam came off. Now it’s got my name. My only regret was not marking down the year the bow was made.
-
I had my name put on my new Black Widow Recurve. The bow ain't going anywhere.
-
You can remove the name very easily if you want. 320 sand paper even if you have to sand to the wood. Then just a coat or two of Tru Oil will march up to original finish. You can even ad a complete coat of TurOil to the entire bow. I wipe on TruOil with a paper towel and immediately wipe it off with a dry paper towel...tippit
-
I’ve removed several names from bows , most Ive done had the name on top of the sealer but under the final clear, take very fine steel wool and lightly rub the area with the name on it, take it easy and take your time , you will eventually get it, then just spray a coat of clear over it, the ones Ive done , you couldn’t tell it had ever been touched
-
What I would do is see if the name was painted on over the finish or was covered with the finish. Painted on, a bit of acetone on a piece of rag should rub it off without getting much into the bow's finish. If it's under the finish, I would use a new utility knife blade to gently scrape off the finish until the name is gone, buff with 1000 grit wet sandpaper and then use an artist brush to paint over a coat of minwax polyurethane, getting it as even as possible. If it needs to be dull, buff with 4/0 steel wool.
-
Never had my name on a bow but one time. That time I told the bowyer I just wanted the date when bow was made not my name. Got the date plus my name. :nono: I want someone 60 or 100 years from now to know when it was made.
-
I see the name on the bow as part of the history for whom the bow was made. It has nothing to do with who owns it now. I have not ordered a new bow in over 20 years and have gone through plenty of customs and never worried about the name on the bow and even met some folks based on the name and tracking down the original owner. Personally, I would never remove the name just for the sake of removing the name, mine or a previous owner.
But that's just me.
-
I once removed a name of of a Asbell Bighorn bow with automotive cleaning compound. it worked great.
-
You can remove the name very easily if you want. 320 sand paper even if you have to sand to the wood. Then just a coat or two of Tru Oil will march up to original finish. You can even ad a complete coat of TurOil to the entire bow. I wipe on TruOil with a paper towel and immediately wipe it off with a dry paper towel...tippit
........
Thanks for the information!