Trad Gang
Main Boards => The Bowyer's Bench => Topic started by: Burnsie on April 03, 2024, 05:14:32 PM
-
I've refinished a bow and I'm wanting to write the bow specs back on the riser before putting the final coat of finish on.
What type of ink do you all use that doesn't run or smear?
-
I got a silver/gold/white set on Amazon, in Extra Fine. That’s all I use. The tips are 0.7 mm. I forget the brand, but don’t get Sharpie, they blot and/or dry up.
-
Uniball Signgo pens work well for me.
-
India or acrylic ink works well for me.
-
I use India ink with a dip pen.
Kyle
-
Thanks guys
-
I had one silk screen made for a test, then I got a second one.
Because my hand writing with the Indian ink and ME look like poo. :banghead:
Yes I meant a bird in the high sky :laughing:
(https://i.imgur.com/rCGhlA1.jpg)
This is the first one for a test, It did a good job so I cut it way down to 3 to 4".
(https://i.imgur.com/JwlhpYy.jpg)
(https://i.imgur.com/Fu3Ojkt.jpg)
It dry's very fast and I have to wash it out with water between bows if you are doing 2 or more at a time.
(https://i.imgur.com/KqmXUzg.jpg)
-
Well you got hy bird on that one. Hybrid
-
LOL... what's a hibird ? :biglaugh: :biglaugh:
this is what i use
https://www.amazon.com/dp/B00A6VVO1M?ref=nb_sb_ss_w_as-reorder_k8_1_18&=&crid=2IR2O1UOZXZ6J&=&sprefix=fine+tip+decocolor