Trad Gang
Main Boards => PowWow => Topic started by: yekrut on August 02, 2009, 11:10:00 PM
-
We made a arrow cutoff saw, and I was wondering if it is ok to cut them if they are already fletched up. Will it work ok?? I seem to thinks. I need to cutt some before hunting season and get them ready. thanks
-
I can't see how it would be a problem.Done it lots of times.
-
Yes, just figure your length from the valley of the nock to an inch past the point to allow for the taper. Measure twice, cut once.
-
As long as you cut from the front of the arrow... :bigsmyl:
Oh, and if you are using carbon or aluminum where you use an insert, screw your broadhead into the insert before gluing it in if you want to have the head lined up a certain way. First batch of carbons I ever did I had broadheads pointing every which way when I started screwing them in. Ticked me off I didn't think of it in advance.
-
Thank you I'll give it a try. I cut some last night and turned out ok, so I wanted to ask this question before I started cutting the rest of my arrows. Thanks :)