Trad Gang

Main Boards => PowWow => Topic started by: bswear on October 01, 2009, 09:39:00 AM

Title: Signature nocks on AD hammerheads
Post by: bswear on October 01, 2009, 09:39:00 AM

Can I use Bohning Signature nocks on AD hammerheads with a 3-28 unibushing.  Would they look goofy and should I just try the g nocks?

Title: Re: Signature nocks on AD hammerheads
Post by: JRY309 on October 01, 2009, 10:34:00 AM

Bohning Signature nocks are for standard uni-bushings and standard size 5/16" carbons with a .246 ID.ACC 3-28 bushing are designed for G-nocks,G-nocks have a smaller diameter shank.You can get G-nocks in two different sizes a large groove with a .098 throat and small groove with a .088 throat.

Title: Re: Signature nocks on AD hammerheads
Post by: Bucksnort101 on October 01, 2009, 07:06:00 PM

I've been using 5/16" Classic Nocks on my uni-bushings and they appear to be fine. They are a little loose on the bushing but used some slow setting super glue and spun them on the shaft and they seemed to center fine.