Trad Gang
Main Boards => PowWow => Topic started by: Hoser1268 on May 12, 2011, 08:56:00 PM
-
Hey guys,
I looking to get a set of antler limb bolts. I know that Sticshooter used to make them but I'm having a hard time getting in touch with him. I know he used to have problems with his email. Any help or info would be appreciated.
Rob...
-
Rob,
I'm in the same boat. I've tried to PM him on here and contact him by email. Please let me know if you figure out how to get ahold of him.
-
Not a problem.
-
Same here.
I have been trying to get some limb bolts for some time now, and can't seem to get in touch.
Are you out there Frank? Hope all is well!
-
[email protected] can hook you up
-
I got a pm from frank a little while back about limb bolts and a knife, but have been waiting for another reply. He's probly a busy guy with all the stuff he outs out. But from what he told ne his prices are greY for the awesome job he does.
-
I started making them for the same reason. Just using allen head limbolts on existing bows, I never went out and bought the metal bolts themselves. I'm sure I do it the hard way, but it works. I made several pairs using the bolts with the brass undercap (not sure of terminology). I cut a small length of allen wrench off, about 1/2 inch and epoxied it into the allen hole in the bolt. This gives the antler a bit more to grab than just the flat head. Then I use a dremmel tool to hollow out the antler butt to fit nicely over the whole bolt and halfway over the brass undercap too. Then I use an epoxy found at any hardware store that is specialized for concrete and metal and glue everthing together. Worked like a charm. Have one set on a 72# Blacktail, no problems. Like I said,. I'm sure there is a better way, but it worked well in a pinch.
I have PLENTY of antler butts here, I've been planning on posting them in the sponser classifides but have been too damn busy.
Here's a couple of pics
(http://i868.photobucket.com/albums/ab246/yornoc/099.jpg) (http://i868.photobucket.com/albums/ab246/yornoc/bows/deerburrs005.jpg)
-
John at Anneewakee also has some
-
There is a nice set for sale on the auction site. Jon
-
I have a pair of black widows that need a new home.
-
Pics please?
-
I PM'd Frank about getting a couple knives from him for my brother and myself. Never heard back. Oh well.
-
He get a full time job now and for sure will be back to everyone.He is a great guy!
-
I have tried to contacted him with no luck either, I have two sets and want two more he makes the best bolts just beautiful work
-
Yes I make limbolts and knives. I know its hard to reach me and I am trying the best I can. I am working agian and trying to keep my head above water LOL. Sorry for anyone who feels I ignored them. Trust me I did not and do not. Can only do so many things at one time LOL. I know I have sent pms and emails back to some and never heard back.I am not taking knife orders right now got enough right now to keep me busy just about all summer.Thanks<><
-
I have 10 sets right. They are real whitetail burrs.
Bob