Trad Gang
Main Boards => PowWow => Topic started by: yekrut on June 30, 2011, 07:25:00 PM
-
What size adpater for the old bear razor heads. the glue in kind??? thanks
-
You need the short aluminum ones if you plan to use the bleeder blades.They would be 11/32" and that is the correct diam.If you only want to run them as 2 blades,you could use any of the full length 11/32" adapters.They would be about 25 grs,I believe.
-
can I use a 125gr brass adapter in a 11/32? to mount them on , I need the extra weight.
-
You can put a 100 gr steel adapter, but you will have to remove some material off the bleeders if you want to add the bleeders
-
is there a heavy short adpater available? or are they all light wieght ones. sounds like alot of messing around . I want to use the bleeders but need a heavy adpter.?
-
So are you using carbon arrows then?The only 125 gr brass adapters I know of are for gluing in a carbon shaft and take the place of adapter and insert.If that is what you are referring too,yes,they would be perfect.I have some here and tried one in a Razorhead.They don't block the slot.
A 75 gr steel adapter,at least the ones I have,also work.You would need an insert of your choice with those.You could use inserts of aluminum of app. 14 grs or 50 or 100 gr brass.
Actually,that is more options for use with the Razorheads than I thought there would be.
-
yes I am useing carbons and yes those 125 gr glue in ones are the kind I would like to use if I can. thanks so much Jim.
-
Those are pretty cool adapters.I never got a chance to use them.I hadn't thought about them also working with the Razorheads.PM me your address and I will send you this dozen.
-
pm. sent. thanks for the help..