Trad Gang

Main Boards => PowWow => Topic started by: Chuck Fawcett on August 30, 2011, 08:47:00 PM

Title: Brace height for a martin mamba
Post by: Chuck Fawcett on August 30, 2011, 08:47:00 PM

Hi guy's, a quick question on the brace height for a martin mamba, the bow is 54inch's tip to tip unstrung with an AMO of 58, it's pull poundage is 70# @ 28. Just wondering what and if any of you have a mamba and may suggest a brace height to start from. It's from the back of the riser to the bowstring is that correct, it's been awhile for me. Any input would be apprecisted, thanks again Chuck.

Title: Re: Brace height for a martin mamba
Post by: Night Wing on August 30, 2011, 11:43:00 PM

A 58" Martin Mamba's recommended brace height is 7"-7 3/4" which can be confirmed on the Martin link below (lower right hand side of the page near the bottom).

 http://www.shopatron.com/products/productdetail/Mamba+Recurve/part_number=2370/189.0.1.1.2466.0.0.0.0?

Title: Re: Brace height for a martin mamba
Post by: Chuck Fawcett on August 31, 2011, 05:01:00 PM

Night Wing- Thanks for the quick reply and link to go to. Sure puts me right in the ball park. I'll talk to you later and thanks again Chuck from Nova-Scotia Canada. Good hunting later.