Trad Gang

Main Boards => PowWow => Topic started by: mike g on June 11, 2012, 11:34:00 AM

Title: Broadheads 3 to1
Post by: mike g on June 11, 2012, 11:34:00 AM

I have not been keeping up on things lately....
    Dose anyone out there make a 3 to 1 single bevel 125 gr screw in Broadhead....?
    I used to get Broadheads from a guy in Austraila but can't remember who....
    Thanks for any help....

Title: Re: Broadheads 3 to1
Post by: JimB on June 11, 2012, 11:46:00 AM

There aren't many true 3 to 1 broadheads out there and I don't know of any that light.Check out the Tusker broadheads at Braveheart Archery in the sponsors list and see if there is anything close.

Title: Re: Broadheads 3 to1
Post by: Orion on June 11, 2012, 11:47:00 AM

I'm not aware of any true 3-1 single bevel that's available in 125-grain screw ins.  Most are heavier than that.

Title: Re: Broadheads 3 to1
Post by: Jake Diebolt on June 11, 2012, 11:52:00 AM

to get a true 3 to 1 at 125 grain, and still be wide enough for most regs, I think you'd have to have a 3 inch long, 1 inch wide broadhead with really flimsy metal. Most of 3-to-1 are quite a bit heavier.

Title: Re: Broadheads 3 to1
Post by: mike g on June 11, 2012, 11:59:00 AM

Come to think about it....
   I think the ones I got from Down Under was Glue on....
   I still have a couple mounted up....
Thanks guys....