Trad Gang

Main Boards => PowWow => Topic started by: Bigjackfish on October 10, 2014, 05:25:00 AM

Title: Clicker top or bottom limb
Post by: Bigjackfish on October 10, 2014, 05:25:00 AM

I am about to install a clicker on my 64'' Super Kodiak .Should I install on upper or bottom limb,pros and cons of both.

Title: Re: Clicker top or bottom limb
Post by: Stalker58 on October 10, 2014, 06:03:00 AM

Most usually mount it on the top limb.
It's closer to you ear, so you can hear it better.

Title: Re: Clicker top or bottom limb
Post by: 2bird on October 10, 2014, 07:04:00 AM

I use to have one on my top limb.... Make sure you trim the chain as much as possible because it with ding and mar you limb if you leave it long

Title: Re: Clicker top or bottom limb
Post by: David Mitchell on October 10, 2014, 10:58:00 AM

I put them on the top limb.  I remove the chain and replace with cord--got some 750# braided spectra cord from Chad (LBR) at Denton Hill that is absolutely perfect size to fit in the hole in the clicker blade, heat and flatten the end so it won't pull through the hole and no knot is needed.  I tried the release cord they use on compounds but what I got was way too stiff and acted like it had some wire in it.

Title: Re: Clicker top or bottom limb
Post by: Rob W. on October 10, 2014, 11:57:00 AM

Top. I like braided decoy cord.

Title: Re: Clicker top or bottom limb
Post by: Jim Picarelli on October 10, 2014, 06:21:00 PM

Decoy cord works great

Title: Re: Clicker top or bottom limb
Post by: bigbadjon on October 10, 2014, 07:37:00 PM

I put mine on the bottom part of the riser like Scott Antczak. It makes the cord a little longer but I believe improves the function.