Trad Gang

Main Boards => PowWow => Topic started by: Al Kidner on November 11, 2015, 08:09:00 PM

Title: Lighted nocks for AD shafts...?
Post by: Al Kidner on November 11, 2015, 08:09:00 PM

G'day guys,

I've been thinking of trying out some lighted nocks. Has anyone tried them in Arrow Dynamics carbons?

Title: Re: Lighted nocks for AD shafts...?
Post by: ranger 3 on November 12, 2015, 08:39:00 AM

I have on GT's and they work great

Title: Re: Lighted nocks for AD shafts...?
Post by: Danny Rowan on November 12, 2015, 10:53:00 AM

Hi Al,

The only lighted nocks I could find for my AD shafts is the nockturnals. But I have the Easton uni bushings in mine, you would have to check if they make them for the shafts if you do no use the uni bushings.

Title: Re: Lighted nocks for AD shafts...?
Post by: Flingblade on November 12, 2015, 11:18:00 AM

As with Danny the only ones I found to work were the nockturnal in size G with the uni-bushing.  The fit was still very tight and some of them I couldn't get to fully seat.  Sanding them down helped. Broke one of them trying to push it in and finally gave up.

Title: Re: Lighted nocks for AD shafts...?
Post by: jmar595 on November 13, 2015, 08:40:00 AM

I made some with the help of a YT video that uses two nocks and a thill bobber light. The boober lights are $3.50 and are push on pull off. Cut one of the nocks end off and glue that to the bottom of the light then cut the end of the other one leaving enough for the end of the light to fit in and glue it in that end also. Slide it into the arrow and pull slightly. It should get turned on when you shoot.

Title: Re: Lighted nocks for AD shafts...?
Post by: Terry Green on November 13, 2015, 10:16:00 AM

Never used them....yet...but nockturnals.

Title: Re: Lighted nocks for AD shafts...?
Post by: Al Kidner on November 14, 2015, 12:29:00 AM

Thanks guys. Seen me a vid on book face and thought they maybe worth a try...