Cx heritage 150 insert

[allek81]

What inserts are people who shoot heritage  shafts using.I Need 75gr inserts for what I want to set up with my 150s, I have 100gr brass inserts but don't fit.

Cheers Al

[rraming]

I use the screw in things from Big Jim, they screw into the back of the insert with a long tool that he sells as well

[Bladepeek]

Are you talking about the GT insert weights? I have those, but did not think they would screw into Carbon Express inserts.

[MnFn]

I used the 100 grn brass insert with up to 160 grain heads in a CE Heritage 150, 29"long. For 49 - 53# bows.  Mostly shooting wood these days.

[rraming]

Originally posted by Bladepeek:
Are you talking about the GT insert weights? I have those, but did not think they would screw into Carbon Express inserts.

Yes - can't remember if they are CE inserts or Gold tip but that is what I use, big Jim would know. I have piles of stuff so I can usually make things work.
The CE shafts I have are not the new ones with the different logo on then, I have not purchased those and after that switch I went back to wood - that doesn't seem to change

I think any insert with the threaded hole in the back works, must be standard China size - ha!

[goingoldskool]

I have no trouble getting the weights into CE 250's..... and the standard CE insert accepts them with no problem.


Good luck, shoot straight and God bless,

Rodd

[Hankem]

I had some that didn't fit well myself on the CE Heritage that i got from 3 Rivers.... They were a little too tight. So i screwed in a field tip into the insert and put them in my drill press and used a file to size them down.... worked great!  you could do the same with a hand held drill motor or a cordless drill too.

[rraming]

My weights slide right in

Is it the new shafts causing the issue?

[8upbowhunter]

I am using 100gr brass inserts in my CE 150's and have no problem with the fit. I just ordered some 50gr brass inserts from 3R and noticed they have one listed for GT arrows and another for CE arrows. If I remember correctly the inside diameter of the CE shafts are slightly smaller than the GT shafts so you may have the brass inserts for the GT arrows. If I remember correctly the id of the GT shafts are .246" and the id of the CE Heritage shafts are .244".

[allek81]

Yeah thanks guys for all the info, I'm in Australia so makes it hard to get some stuff from local store's

[Bladepeek]

8upbowhunter, I think you nailed it.