HELP!!! Long wood arrows shafts.

[BrianC]

I'm looking at getting into some wood arrows, but my draw length to the edge of the shelf is 31 1/2".  

I'm going to need a 33 to 34"  arrow shafts with a 70-75 spine.

I'm shooting a Bob Lee bow  30" @ 50#  64" AMO.

Thanks!!!

Brian

[Jim Wright]

I believe some can be found at  www.forresterwoodshafts.com,  there are perhaps others and you can have footed shafts made to accommodate your draw length as well.

[BrianC]

Thanks Jim!

I have looked at Forresterwoodshafts.com.  Looks like they only have mahogany shafts in my size for about $40 for a half dozen.  Was hoping to find something a little cheaper, but I might just have to "bite the arrow" and go that route.


Brian

[Jim Wright]

I am shooting some Mahogany Arrows through my Toelke Super D. The dozen I ordered were very consistent in weight and spine. They remind me of Douglas Fir concerning durability and straightness with a very pretty grain, no need to stain.

[longstiks]

Give Hildebrand a call ,I've gotten 33" from them and top quality.
Denny

[SCATTERSHOT]

You might try getting the shafts if your choice and adding Reparrow footings to them. That should give you the length you need.

[Michael Pfander]

Bamboo.  They come in that spine and are plenty long my last ones are 33".
MAP

[JRY309]

I had bought some 34" ash shafts from Alleghany Arrows woods,but that was years ago.

[Zradix]

Originally posted by SCATTERSHOT:
You might try getting the shafts if your choice and adding Reparrow footings to them. That should give you the length you need.

That was my 1st thought.

[damascusdave]

Surewood Shafts is a sponsor here...if Steve cannot help you he can probably tell you where to find what you are looking for

DDave

[frank bullitt]

Do both, get Steve's shafts and Jim's Reparrows!

[Don Stokes]

I suggest you will need a much stiffer spine at that length.

[oldrubline]

I Love my surewood shafts!!  Those guys were awesome to deal with and these shafts are 110% top notch/shelf quality.  I am very picky about shafts and have made my own in the past,  but I trust these.  

Dan