Home made dial caliper spine tester-opinions, advice?

[slowbowjoe]

Well I'm about ready to try something other than my old Ace 101 for a spine tester. The Adams is nice, but out of my price range, so I'm thinking the Ace 203 (? the simple model, hang on the wall rig) or possibly a home made tester using the calipers.

I searched the how to's and build alongs, but didn't come up with anything. What's you experience or suggestions for an "affordable" tester?

[kennym]

Here ya go....

 http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=125135#000000

That one is quite a rig, too much for me to tackle!!  :D

[slowbowjoe]

Thanks Kenny, impressive, but beyond my skills too!

[CraigC]

I'm working on a spine tester that uses a dial indicator to measure the arrow's deflection...I'll post pics when I finish.

[Lefty]

I made one a few years back following Jim Hill's spine tester plans.  The biggest expense was the dial caliper that I bought used on the auction site for $20 bucks or so.  I would post a link but it is on another site and I don't believe it is allowed to post links to other sites here.  Just google search for Jim Hill Spine tester.  Any problems finding it, just PM me and I will get you a link.

[CraigC]

after looking at Jim Hill's design...I'm changing my set-up to match his...

[Pat B]

I used the James Hill spine tester design also.