Wood arrows for a JD Berry using 135 gr heads

[frassettor]

I have a JD Berry Vixen 50@28 (which is my draw)
I shoot a b-50 dacron string on it. I will be shooting Doug Fir shafts  . I have an abundance of 135 gr Zwicky Deltas that I would like to utalize.
What spine and length would I need to use these heads?
Thanks in advance

[NBK]

Gonna follow this one as I have a Vixen with almost the same specs and same heads lying around!

If your arrow is to be 28.75 or 29 inches long I would bet that it will be a 50-55 or a 55-60, with 53 to 57 being the best.

[Ari_Bonn]

A 50-55 cut to 29" back of point should be perfect.

[Orion]

Agree with pavan and Ari.  I like to lean toward the heavier spine.  If it were me, 55-60# cut to 29 BOP.  Good luck.

[snag]

How's the shelf cut on the Vixen?

[The Whittler]

If the bow is not cut to center then under spine arrows will work. But a lot has to do with your release.

45/50 or 40/45 spine. I have an older JD Berry Yawha (spelling) it's 64#@28" and I draw about 29". When I shot it wood 55/60 spine just a little over 29" with 125gr BH.

[frassettor]

Originally posted by snag:
How's the shelf cut on the Vixen?

It's not cut to center

[Green]

My Vixen is 50#@28" and likes 50/55's best as well. Douglas Fir and Ash.

[crazynate]

50/55 should work