Kanati owners ,what arrow?

[BUCKY]

Kanati owners whats your arrow set up? I own two 56" 45#@26"draw. I shoot 27" gold tip hunters with 3 5" helical feathers. I use 100 grain brass inserts with 150 grain 2 blade stingers.

[Guss]

What spine you shooting..? 500 or 600..?

[BUCKY]

500,35/55s

[Guss]

My specs are similar to yours...I don't have a Kanati right now, but when I did...I was always borderline on 15/35 or 35/55..

[OBXarcher]

Mine is 47@29.
I'm shooting gt 35/55 30.5" with aluminum insert and 150gn heads.

[Covey]

60" Kanati 54# @ 28" I draw right at 29. I shoot a 31" 2219 with 150 gr broadhead.

[Matty]

You can call JK on this I've discussed it with him at length. Of my 3 Kanatis ... 56,58,60. (47-50#) 15/35 with 175gr work awesome. And the 3555 with 225-250 should work great as well which is right where you're at. But I think because of your draw length being 26" you are a bit stiff With the 3555. I'd personally get the 1535 or 600. And use a double nocking point.
Just my opinion.

[Covey]

I will add this, my Kanati loves stiff spined arrows! I was pretty surprised when I had to go to a 2219 at 31" and that's with a 150gr up front. I tried heavier points, but it starts showing a little weak above 175gr head. I get great bare shaft flight and dang near perfect holes through paper with this setup, even with my sketchy form.

[Covey]

[rnharris]

I would bareshaft a 15/35 or 600 spine start full length which is about 30" with the full length shaft you will have more options on point weight or just pick your point weight you want to shoot and cut 1/4" at a time until they fly down the middle kanatis are great shooting bows good luck

[mahantango]

Mine is 56", 48# at my 27" draw. I'm shooting .600 Easton's 28.75" with 145gr. It will also tune with .500s, but it takes about 200gr and trajectory suffers. My favorite bow ever.

[FAV 52]

Bucky , mine was a 1916 aluminum cut to 29in and 135grn zwicky delta up front . 56in Kanati 52lbs at 28in draw , I draw 27 1/2 or so . Worked for me .