3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Help with arrow setup for 45# Kanati longbow  (Read 1091 times)

Offline limbshaker

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 270
Help with arrow setup for 45# Kanati longbow
« on: September 20, 2017, 03:09:00 PM »
So after a 2 year break to hopefully forget some bad habits, I'm back at the traditional archery game. Been tuning some arrows and have them flying well but have an odd observation...

My bow is a JK Traditions Kanati 45#@28, and I draw around 27". Shooting GT35/55 Traditional cut to 28.5 BOP. I'm running 175gr field tips with a 1" 2117 footing and getting good flight (so it appears). I can shoot a bareshaft at 25 yards and it sticks in straight and within just a few inches of my fletched arrows.

According to the Dynamic Calculator, and from seeing what others are shooting, these should be way stiff. When I put a 200+gr tip, the arrow visibly noodles around but still groups decent. I can even drop down to a 145gr point and still fly straight.

I was shooting the same setup with shafts at 30.5 BOP and 175gr heads and couldn't hit squat. So I started playing around and it's like a switch flipped when I put a 100gr head on, they shot lights out. So my logic was to cut them down, and add more point weight to make a nice high FOC setup.

What gives? Is it me? Is it mislabeled arrows? Am I just lucky?

I shot woods last time around, and had them flying great in no time. They have always been a breeze to tune for me.

Just wondering if you guys have ran into similar. Thanks for sharing any thoughts!     :)
"Leaves are fallin all around..time I was on my way." -Led Zeppelin

Offline mahantango

  • Trad Bowhunter
  • **
  • Posts: 1384
Re: Help with arrow setup for 45# Kanati longbow
« Reply #1 on: September 20, 2017, 03:49:00 PM »
I can't tell you what is going on,sometimes this stuff defies logic, but I shoot a 48#@28" Kanati also drawn 27". 600 29.5" BOP with 145 gr. Fly like lasers.
We are all here because we are not all there.

Offline Orion

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 8252
  • Contributing Member
Re: Help with arrow setup for 45# Kanati longbow
« Reply #2 on: September 20, 2017, 05:48:00 PM »
Your logic is sound, likely just took too big a step at one time, i.e., going from 30.5 inches and 100 grains to 28.5 inches and 175 grain heads.

If the first combination shoots lights out, I'm thinking a 150 grain point would work better with the shorter arrows. Regardless, the 35/55s should work.  just may need to play with the length/weight variables a bit more.  Good luck.

Offline BOHO

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 991
Re: Help with arrow setup for 45# Kanati longbow
« Reply #3 on: September 20, 2017, 06:20:00 PM »
1535 gold tip full length with 125 point shoot great from my 45# longbow
TGMM Brotherhood of the Bow
Black Widow Recurve
Mike Corby Special
DAS Recurve

Offline BUCKY

  • Trad Bowhunter
  • **
  • Posts: 1199
Re: Help with arrow setup for 45# Kanati longbow
« Reply #4 on: September 20, 2017, 06:48:00 PM »
Two kanatis both 45@26. Gold tip 35/55 cut at 27" with 100 grain inserts and 150 heads. 3 5" feathers full helical. Shoot like darts

Offline limbshaker

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 270
Re: Help with arrow setup for 45# Kanati longbow
« Reply #5 on: September 20, 2017, 07:12:00 PM »
Thanks for the info guys. Something must be a little weird with my setup or technique (highly likely) or both     :dunno:    

At the current configuration they have a dynamic spine of around 60#.

My first go round setup was about 56# dynamic.

Most guys, and Bucky above (Thank you for sharing your setup) shoot more around 48-55# dynamic spine.

As long as they are flying alright I aint complaining! I was just a little bumfuzzled as to what was up. This bow may just be a funky shooter. I like it though.

Thanks again!
"Leaves are fallin all around..time I was on my way." -Led Zeppelin

Offline BUCKY

  • Trad Bowhunter
  • **
  • Posts: 1199
Re: Help with arrow setup for 45# Kanati longbow
« Reply #6 on: September 20, 2017, 10:10:00 PM »
Whats your brace and nock height? You shoot split or 3 under?

Offline limbshaker

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 270
Re: Help with arrow setup for 45# Kanati longbow
« Reply #7 on: September 20, 2017, 10:31:00 PM »
Brace height is 7 3/8"

58" bow

Shooting 3 under, and Jason tillered it for 3 under
"Leaves are fallin all around..time I was on my way." -Led Zeppelin

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©