Loose broad head tip

[Jakeemt]

I use screw in type broad heads and had issues with them coming loos while nocking about in my quiver.  So I put a little plumbers tape on the thread works great and still easy to remove.

[M60gunner]

Good tip! That’s what most of us use here in AZ. The wax on the threads doesn’t hold up in our heat. These are field tips I am referring to.

[Schmidty3]

I actually glued mine in with a tiny dab of big jims hot melt glue. Worked well. If its a bit stiff to remove just heat it up a bit.

[NBK]

Good idea.  I've used small rubber "O" rings in the past.  Allows me to tighten them and orient the broadhead as needed.

[Rando]

I second the O-ring trick... been doing that forever and I like the ability to orient the head.
Good tips!
Randy

[Longtoke]

Dental floss works well too.

[Jakeemt]

I just screw them in (with tape) then place the nock and fletching based on the broad heads orientation.

[JamesV]

a small dab of silicone works great