Author Topic: cleaning wax from bow limbs? (Read 1257 times)

adkmountainken · « **on:** February 25, 2018, 05:30:00 PM »

what is the best way to clean wax from bow limbs? I freshly waxed string was left tight to the limbs unstrung and a LOT of wax is caked on.

South MS Bowhunter · « **Reply #1 on:** February 25, 2018, 05:37:00 PM »

Acetone will clean it right up!

Charlie Lamb · « **Reply #2 on:** February 25, 2018, 05:56:00 PM »

Elbow grease and a soft cloth

meathead · « **Reply #3 on:** February 25, 2018, 06:00:00 PM »

What Charlie said.

adkmountainken · « **Reply #4 on:** February 25, 2018, 06:25:00 PM »

tried that seemed to make a hellva mess...

adkmountainken · « **Reply #5 on:** February 25, 2018, 06:51:00 PM »

elbow grease applied and starting to look good! guess I just had to hear uncle Charlie say Cowboy up Sally and get it done.....

grouseshooter002 · « **Reply #6 on:** February 25, 2018, 07:20:00 PM »

Ken,
A little hot water will help.

jess stuart · « **Reply #7 on:** February 25, 2018, 07:39:00 PM »

I would be careful with acetone its pretty hot and can attack and soften some types of finish.

nineworlds9 · « **Reply #8 on:** February 25, 2018, 08:16:00 PM »

Yeah I would rather naptha before acetone. I agree with Charlie, soft cloth and work usually works great on most satin limbs in my experience.

Stumpkiller · « **Reply #9 on:** February 25, 2018, 09:43:00 PM »

I dab BriWax on mine and let it dry for a dull "camo" for hunting.

To remove it a cotton rag and a LOT of elbow grease. You have to rub hard enough to warm the wax and bow. Shines like a new bow after that.

two4hooking · « **Reply #10 on:** March 01, 2018, 02:28:00 PM »

Like dissolves like... Johnson's paste wax and some elbow grease.

Holm-Made · « **Reply #11 on:** March 01, 2018, 02:40:00 PM »

If you rubbed it off in warm temperatures, it would be less work.

Steelhead · « **Reply #12 on:** March 01, 2018, 05:16:00 PM »

I would use Goo Be Gone and soft rag or soft cloth.Has worked superbly on my bows and has not harmed finish.You wont have to use much elbow grease.It works on all kinds of other grime,oil,soot,grease,soft glues,adhesives etc.So its a good product for other projects,as well.

bucksakemmer · « **Reply #13 on:** March 01, 2018, 05:23:00 PM »

Goof Off works great. Or Goo Be Gone

Cyclic-Rivers · « **Reply #14 on:** March 04, 2018, 08:29:00 AM »

Ken, stick it in the camp fire. Works every time. Of course it will also remove your bow too. :rolleyes: :p

Bigriver · « **Reply #15 on:** March 04, 2018, 08:43:00 AM »

Denatured alcohol cuts wax, leave no residue or film, and wont affect finishes. I use it for pre finish wipe down on redoing bows, cabinets, arrows, all kinds of uses.It is a great degreaser.

beachbowhunter · « **Reply #16 on:** March 07, 2018, 04:55:00 PM »

Just like a surfboard...put it in the sun for a bit, or use a hair dryer, wipe off with paper towel. Cloth doesn't work well. Goof-off if you want a short cut.

David McLendon · « **Reply #17 on:** March 09, 2018, 08:11:00 AM »

91% Isopropyl Alcohol on a soft cloth will remove it and is a lot less scary than Acetone on fiberglass. I never wax my Satin/Matte finished bows, I clean them with a glass cleaner or Alcohol.

moebow · « **Reply #18 on:** March 09, 2018, 09:08:00 AM »

Good advice for cleanup above, my vote would be for denatured alcohol too,

I'd add too that IF you are getting string wax on the limbs of your unstrung bow that you are using too much wax. Just like oiling a gun, more is NOT better.

Arne


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: cleaning wax from bow limbs? (Read 1257 times)

Users currently browsing this topic: