Shooters Forum

Contribute to Trad Gang
Become a Trad Gang Sponsor


« previous next »
Pages: [1]   Go Down

Author Topic: Three under tiller  (Read 1054 times)

Offline bowhntrct

  • Trad Bowhunter
  • **
  • Posts: 21
Three under tiller
« on: April 09, 2007, 10:19:00 PM »
If a bow is tillered for three under how would it effect it shooting split finger? Would you have severe finger pinch?
Logged
Life is not a journey to the grave with the intention of arriving safely in a pretty, well preserved body, but rather to skid in broadside,thoroughly used up and worn out,and loudly proclaiming WOW!! What A Ride!!

Offline beleg

  • Trad Bowhunter
  • **
  • Posts: 40
Re: Three under tiller
« Reply #1 on: April 10, 2007, 07:23:00 AM »
Hi,
It can be a little noiser.
Finger pinch depends on bow lenght and design.
Martin
Logged

Offline JRY309

  • Trad Bowhunter
  • **
  • Posts: 4383
Re: Three under tiller
« Reply #2 on: April 10, 2007, 09:20:00 AM »
Most bowyers tiller their bows for split at 1/8 to 3/16 positive and an even tiller for three under.It shouldn't have any effect on finger pinch.But you can shoot a bow tillered for split to  shoot it three under by playing with your nock height adjustment.As beleg says finger pinch depends on bow length and design and your draw length.
Logged

Offline Molson

  • Trad Bowhunter
  • **
  • Posts: 1582
Re: Three under tiller
« Reply #3 on: April 10, 2007, 09:29:00 AM »
No, it will not cause finger pinch. You may have to move your nock point around a little, but that's about it.

(Must have been posting at the same time JRY)
Logged
"The old ways will work in the future, but the new ways have never worked in the past."
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©