Shooters Forum

Contribute to Trad Gang
Become a Trad Gang Sponsor



Author Topic: Arrows hitting shelf  (Read 1266 times)

Online OBXarcher

  • Trad Bowhunter
  • **
  • Posts: 1160
Arrows hitting shelf
« on: May 03, 2007, 06:59:00 AM »
I just got my Martin Savannah and really like it.

It says 55@28 but my scale has it at 52-53#.

I am shooting gold tip 33-55 traditionals at 30". The arrows are hitting the shelf and making a heck of a noise. Is the spine to weak or 2 stiff ?
I have tried 100 and 125 gn points. I don't have any arrows with out fletching but I can strip some if need be.

These are the same arrows I am using with my predator recurve at 55# and they work great with it.


Any help would be appreciated

Offline mpolk

  • Trad Bowhunter
  • **
  • Posts: 8
Re: Arrows hitting shelf
« Reply #1 on: May 03, 2007, 08:51:00 AM »
I have a Savannah also, 50@28.  I'm shooting 35/55's at 29.5 and theu fly great.  My nocking point is 1/8 high from center.  At 55#, you might need 55/75's.  Is the kick up and down or side to side?  Up and down is usually nocking point too high or too low.  Shortening the arrow will make it stiffer.  I shot a bare shaft at 31 inches, then cut off a 1/4 inch at a time till the shaft was hitting straight at 10 yards.  I stopped at 29.5.  I also set the brace height at 7 1/4 and get good groups.

By the way, the spine for a recurve is different than for a longbow

Good luck
Mike

Online Stagmitis

  • Trad Bowhunter
  • **
  • Posts: 614
Re: Arrows hitting shelf
« Reply #2 on: May 03, 2007, 10:54:00 AM »
Build the shelf out a good 1/4 to start with  and see what happens....
Stagmitis

Online Stagmitis

  • Trad Bowhunter
  • **
  • Posts: 614
Re: Arrows hitting shelf
« Reply #3 on: May 03, 2007, 11:06:00 AM »
Oops..Build it "up"....Where is your nock point? I would start with 1/2' above center..
Stagmitis

Offline Hardhed

  • Trad Bowhunter
  • **
  • Posts: 100
Re: Arrows hitting shelf
« Reply #4 on: May 03, 2007, 11:56:00 AM »
Another tip I would add with the savannah - is not to be afraid to try a low brace height.  I played around with mine from 6 1/4 to 7 1/2 and surprisingly, 6 1/4 shot the most accurately, as well as the fastest and smoothest drawing.  I really like the savannah.

Online OBXarcher

  • Trad Bowhunter
  • **
  • Posts: 1160
Re: Arrows hitting shelf
« Reply #5 on: May 03, 2007, 04:53:00 PM »
Mike, what grn point are you using on your 35/55's ?

I have tried the nock from zero to almost 3/4". It is at 1/2 right now.

Stagmitis, would I really buitl out the shelf it it is already hitting it ? I would think it would hit harder then ? What am I missing ?

Hardhed, My brace is 7 1/8 right now. I will lower and try agian.

Thanks for the help guys !!!!

Online OBXarcher

  • Trad Bowhunter
  • **
  • Posts: 1160
Re: Arrows hitting shelf
« Reply #6 on: May 03, 2007, 06:57:00 PM »
Guys, just got back in from adjusting and shooting

THANKS !!!!

changed the brace height to just a tad under 6 3/4 and the nock to 1/2 and it is awesome. quite as can be and throwing the arrows great.

thank goodness I can use the same arrows as my recurve.

Many thanks !!!!!

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©