Shooters Forum

Contribute to Trad Gang
Become a Trad Gang Sponsor



Author Topic: always underspined  (Read 980 times)

Offline doeslayer

  • Trad Bowhunter
  • **
  • Posts: 84
always underspined
« on: March 29, 2008, 11:50:00 AM »
A friend of mine is shooting a BW sa11 55@30. He shoots a true 30 in draw. Every shaft we try to bare shaft is showing weak. The latest is an 32in 75 90 cx weight forward. What are we missing?

Offline Molson

  • Trad Bowhunter
  • **
  • Posts: 1582
Re: always underspined
« Reply #1 on: March 29, 2008, 12:38:00 PM »
Describe "showing weak".
"The old ways will work in the future, but the new ways have never worked in the past."

Offline Mark Hedges

  • Trad Bowhunter
  • **
  • Posts: 80
Re: always underspined
« Reply #2 on: March 29, 2008, 01:41:00 PM »
Are you sure the nocks are not too tight?  If they are it will make the arrow show weak.

Mark

Offline aromakr

  • Trad Bowhunter
  • **
  • Posts: 727
Re: always underspined
« Reply #3 on: March 29, 2008, 03:19:00 PM »
doeslayer:
Your going to need a 90/95 spine minimum if your cutting to 31" BOP.
Bob
Man must "believe" in something!  I "believe" I will go hunting-----

Offline huntnut

  • Trad Bowhunter
  • **
  • Posts: 220
Re: always underspined
« Reply #4 on: March 29, 2008, 04:50:00 PM »
I'm kind of in the same boat. I have a SA II 53@28 my draw shooting a 80-85# hickory shaft w/160gr tip cut to 30" BOP and when I bare shaft tune 10-20yrds the hit slight right and nock left when I go back to 30yrds the miss the target to the right by about 2feet. My broadhead arrow hits about 6"-8" right of my field point arrow back at 30yrds. So I would say if you are shooting 30"draw 31" arrow you are still weak.
Bear Grizzly 50#@28

Offline wtpops

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2323
Re: always underspined
« Reply #5 on: March 29, 2008, 09:50:00 PM »
2216 or 2219

I shoot a PSA V 53# @ 30". A 2216 works for me
TGMM Family of the Bow
"OVERTHINKING" The art of creating problems that weren't even there!

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©