3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Self Nocks  (Read 465 times)

Offline Fresno Field Archer

  • Trad Bowhunter
  • **
  • Posts: 33
Self Nocks
« on: November 15, 2007, 08:57:00 PM »
Im interested in making a dozen or so arrows with self nocks, but have no experience on the subject. The "How To" forum only had a page on making self nocks on river cane and im not looking in to that. If any one knows a place to go or could just show me how, that would be a great help.

Offline Jeff U

  • Trad Bowhunter
  • **
  • Posts: 185
Re: Self Nocks
« Reply #1 on: November 15, 2007, 09:29:00 PM »
Not much different from cane arrows.  

Just jump ahead after the point where the cane is plugged.  A plugged cane shaft is basically the same as a solid shaft.  Exact same methods will work.

Couple links --

Ionians tonkin cane "how to" produces some unbelievable work:

 http://tradgang.com/noncgi/ultimatebb.php?ubb=get_topic;f=2;t=000070

Or here's a discussion, no photos, of using hacksaw, tile saw, etc...

 http://tradgang.com/noncgi/ultimatebb.php?ubb=get_topic;f=1;t=049634#000000

Offline Fallguy

  • Trad Bowhunter
  • **
  • Posts: 326
Re: Self Nocks
« Reply #2 on: November 15, 2007, 09:33:00 PM »
The way I have done them is to use a very fine toothed cabinet saw to cut a notch down the center of the shaft. Just eye ball it, you well be able to get perfect center as the process goes along. Next I used a round diamond covered ceramic tile blade that fits into a standard hacksaw frame. Just use the first cut as a guide for the round blade go just a bit past the first cut. This is where we get the nock perfectly centered. Take a small mile file that will fit into the notch and open it up to fit your string. Just remove more material off witch ever side is thicker. I also have a small round file that use in the bottom of the grove to make sure that there is no slit from the first saw cut left. I also make the nock just a little loose because when I dip my shafts in sealer it will build up in the nocks. After the sealer is hardened check your nock fit if it is tight use a finger nail file to open it up for a perfect fit. Before I dip them though I wrap thread just below the nock for about a half inch. This well reinforce the nock. I have shot these from 65lb bows and never had a failure in 10 years of year round 3-d shooting.
"In the end we will conserve only what we love. We will love only what we understand. We will understand only what we are taught" Baba Dioum  Conservationist

Offline **DONOTDELETE**

  • Trad Bowhunter
  • **
  • Posts: 10441
Re: Self Nocks
« Reply #3 on: November 15, 2007, 09:38:00 PM »
for wood'n arrows I use the knifty knocker (sp) from Raptor Archery. works great...

Offline George Tsoukalas

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2922
Re: Self Nocks
« Reply #4 on: November 16, 2007, 09:15:00 AM »

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©