Shooters Forum

Contribute to Trad Gang
Become a Trad Gang Sponsor


« previous next »
Pages: [1]   Go Down

Author Topic: Shooting Three Under?  (Read 492 times)

Offline Interseptor

  • Trad Bowhunter
  • **
  • Posts: 594
Shooting Three Under?
« on: November 03, 2011, 09:44:00 PM »
Can I take a bow tillered for split finger and get it to shoot three under?  If so, how would I go about setting it up?
Logged
Palmetto Traditional Bowhunters
Carolina Traditional Archers

Offline Winterhawk1960

  • Trad Bowhunter
  • **
  • Posts: 1311
Re: Shooting Three Under?
« Reply #1 on: November 03, 2011, 10:22:00 PM »
Absolutely, you just set it up like you would normally. Get the brace height right and the nocking point. Some people say that their nocking point is higher when shooting three-under. That isn't the case for me, but you will have to tune it in the same manner that you would any bow.......to YOU.

Winterhawk1960
Logged
What if you woke up tomorrow, with only what you thanked God for today ???

Online McDave

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6080
Re: Shooting Three Under?
« Reply #2 on: November 03, 2011, 10:27:00 PM »
Most bows tillered for split fingers shoot fine 3 under.  Generally you have to raise the nock point a little.  Common nock points for 3 under range from 5/8 - 3/4.  You can determine the correct nock by shooting a bare shaft and adjusting the nock point until you get level or slightly nock high flight.
Logged
TGMM Family of the Bow

Technology....the knack of arranging the world so that we don't have to experience it.
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©