Shooters Forum

Contribute to Trad Gang
Become a Trad Gang Sponsor


« previous next »
Pages: [1]   Go Down

Author Topic: shaft tuning issues  (Read 542 times)

Offline dixiearcher84

  • Trad Bowhunter
  • **
  • Posts: 1
shaft tuning issues
« on: September 25, 2012, 01:50:00 PM »
when I tuned my bare shafts a couple weeks ago they were flying good with 210grs up front. I checked agin today and they need 265grs to hit the target strait. Im using a bear hunter TD its 57.5lbs at my draw and Im shooting 30 inch 2216 aluminum shafts with a 8.5 inch brace height. Could this be because my form and release has changed.
Logged

Offline moebow

  • Trad Bowhunter
  • **
  • Posts: 2509
Re: shaft tuning issues
« Reply #1 on: September 25, 2012, 02:09:00 PM »
That would be the first place I'd look! (form changes)  Your bow or arrows didn't change substantially (brace height would be about all) so  arrows that were flying OK the last time you shot shouldn't need a point weight change today.

Shoot what you have for a while (at least a couple weeks worth of shooting then you will start to recognize whether you need to "re-tune."

Arne
Logged
11 H Hill bows
3 David Miller bows
4 James Berry bows
USA Archery, Level 4 NTS Coach

Are you willing to give up what you are; to become what you could be?

Offline gonefishing600

  • Trad Bowhunter
  • **
  • Posts: 366
Re: shaft tuning issues
« Reply #2 on: November 05, 2012, 06:37:00 PM »
Don't forget about brace height. If you had a new string and it streatched due to break in, you may need to adjust it a bit.
Logged
JD Berry Argos 64" 48#&28"
Toelke Classic Whip 64" 46#@28"
Acs one piece 64" 46#@28"
BlackWidow PLX 66" 46#@28"
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©