3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Arrow Spine Question  (Read 328 times)

Offline Gatekeeper

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2365
Arrow Spine Question
« on: November 21, 2007, 04:36:00 PM »
I am a left-handed shooter and my arrows keep flying to the right. Is this a sign that the arrow’s spine is too high or too low? I have tried to find this information in some of the books that I have but I haven’t found it yet.

I am trying to build some small game arrows with .38 cal casings for the tip so there isn’t a lot of tip weight. If you have any information that you can share with me I would appreciate it.

Thanks,
Tom
TGMM Family of the Bow   A member since 6/5/09

“I can tell by your hat that you’re not from around here.”

Casher from Brookshires Food Store in Albany, Texas during 2009 Pig Gig

Offline nugget

  • Trad Bowhunter
  • **
  • Posts: 32
Re: Arrow Spine Question
« Reply #1 on: November 21, 2007, 04:52:00 PM »
What is the pound of yer bow at yer draw and what arrow are you shooting?
Can yiu see the arrow fishtailing when it goes down range.?
A Heavier tip may settle the arrow down a little.
sometimes you just have to take sevral different arrows and shoot them to find out what works.  :banghead:  
Is it a all Primitive bow or a glass bow?
Life is not a journey to the grave with the intentions of arriving safely in a pretty and well preserved body. But rather to slide in sideways, thoroughly used up, totally worn out and loudly proclaiming....WOW WHAT A RIDE!!

Offline Frenchymanny

  • Trad Bowhunter
  • **
  • Posts: 2379
Re: Arrow Spine Question
« Reply #2 on: November 21, 2007, 05:03:00 PM »
To the right is sign of too much spine for a left handled shooter.
like Nugget said, you can increase arrow head weight to lower the perceived spine.

I half fill the .38 casings with small birdshot, then hot glue it to the shaft

F-Manny
Coureur des Bois
Big Jim: Buffalo Bows 62" 60@27 & 65@27 ThunderChilds 56" 62@27 & 62@27 Desert BigHorn 59@27
ML, Shrew &TC Knives
With a sturdy bow, a true shaft, and a stout heart, we journey forth in
search of adventure.

Dr. Saxton Pope

Offline nugget

  • Trad Bowhunter
  • **
  • Posts: 32
Re: Arrow Spine Question
« Reply #3 on: November 21, 2007, 05:22:00 PM »
Small lead fishing weight work also. Can melt them right in. Get a grain scale and try to keep em the same.
Life is not a journey to the grave with the intentions of arriving safely in a pretty and well preserved body. But rather to slide in sideways, thoroughly used up, totally worn out and loudly proclaiming....WOW WHAT A RIDE!!

Offline Gatekeeper

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2365
Re: Arrow Spine Question
« Reply #4 on: November 21, 2007, 05:36:00 PM »
Thanks Manny that is what I thought but I needed someone to confirm it. I kind of figured the tip was too light because the arrows FOC is not very much and may be causing some of my problems.

Nugget   :banghead:  is right. I have been messing with this trying to make some small game arrows for some time and I haven’t launched an arrow at a squirrel yet but I will someday soon.
The arrows don’t appear to be fishtailing they just fly to the right.

I am shooting a 45# @28” recurve with fast-flight string. My draw is 29.5 so I am drawing a little over 45#.

Thanks for your help guys.  I will increase the head weight and see what happens.
TGMM Family of the Bow   A member since 6/5/09

“I can tell by your hat that you’re not from around here.”

Casher from Brookshires Food Store in Albany, Texas during 2009 Pig Gig

Offline nugget

  • Trad Bowhunter
  • **
  • Posts: 32
Re: Arrow Spine Question
« Reply #5 on: November 21, 2007, 06:58:00 PM »
Never give up. Continue to try new things.
Life is not a journey to the grave with the intentions of arriving safely in a pretty and well preserved body. But rather to slide in sideways, thoroughly used up, totally worn out and loudly proclaiming....WOW WHAT A RIDE!!

Offline Gatekeeper

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2365
Re: Arrow Spine Question
« Reply #6 on: November 21, 2007, 10:12:00 PM »
Nugget,

What do you use to melt the fishing weights?
TGMM Family of the Bow   A member since 6/5/09

“I can tell by your hat that you’re not from around here.”

Casher from Brookshires Food Store in Albany, Texas during 2009 Pig Gig

Offline longbowben

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3334
Re: Arrow Spine Question
« Reply #7 on: November 21, 2007, 10:31:00 PM »
Put lead inside of 38 casing heat with torch intill melted let cool then hot melt to shaft.
54" Hoots 57@28
60" MOAB 60@28
Gold tip, 160gr Snuffer
TGMM Family of the Bow
USAF 90-96 69TH Bomb Squadron

Offline nugget

  • Trad Bowhunter
  • **
  • Posts: 32
Re: Arrow Spine Question
« Reply #8 on: November 22, 2007, 07:46:00 AM »
Yah what he said.
A map gas  torch or acetalyne.
Life is not a journey to the grave with the intentions of arriving safely in a pretty and well preserved body. But rather to slide in sideways, thoroughly used up, totally worn out and loudly proclaiming....WOW WHAT A RIDE!!

Offline Gatekeeper

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2365
Re: Arrow Spine Question
« Reply #9 on: November 22, 2007, 09:38:00 AM »
Thanks I will give it a try.
TGMM Family of the Bow   A member since 6/5/09

“I can tell by your hat that you’re not from around here.”

Casher from Brookshires Food Store in Albany, Texas during 2009 Pig Gig

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©