Shooters Forum

Contribute to Trad Gang
Become a Trad Gang Sponsor



Author Topic: Mechanical release....  (Read 1244 times)

Offline calgarychef

  • Trad Bowhunter
  • **
  • Posts: 1196
Mechanical release....
« on: June 20, 2016, 01:08:00 AM »
Ok I've posted a bit about his before and I'm still struggling with it.  I "ruptured" my biceps tendon and after the surgery I can't turn my wrist 90 degrees to  grab the string.

  I've experimented with a home made strap release but it's not great.  I'm wondering if anyone is aware of a mechanical release that doesn't require the shooter pulling a trigger?  I envision a caliper release that I can hold under my thumb and simply release the sensing to fire the shot.  It see teems to me that this is more like shooting with fingers than reaching over to hit a trigger.

Any help is GREATLY appreciated.

Online Pine

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 4328
Re: Mechanical release....
« Reply #1 on: June 20, 2016, 01:35:00 AM »
http://www.footbridge.org/Rogers-Release.html
I have one of these and they work very well .
It's easier to fool someone than to convince them they have been fooled. Mark Twain

If you're afraid to offend, you can't be honest.

TGMM Family of the Bow

Offline Nala

  • Trad Bowhunter
  • **
  • Posts: 1052
Re: Mechanical release....
« Reply #2 on: June 20, 2016, 04:27:00 AM »
Winn makes a glove type release that has a trigger but you don't pull it to release the string, you let it go.  It's called a Free Flyte, I think.  You hold back the trigger after you lock the string in and draw, when you get to your anchor point you simply relax your finger and the calipers will open and release the string.  

Good luck.

Offline calgarychef

  • Trad Bowhunter
  • **
  • Posts: 1196
Re: Mechanical release....
« Reply #3 on: June 20, 2016, 11:53:00 AM »
Nala, thanks so much for your information.  That's what I've had in mind but all of my searching couldn't find it.  I've sent off an email to the company and I'm hoping (praying) that it can work for me.

Offline calgarychef

  • Trad Bowhunter
  • **
  • Posts: 1196
Re: Mechanical release....
« Reply #4 on: June 20, 2016, 11:54:00 AM »
Graps I experimented with that idea but I can't turn my arm to grasp the string so unfortunately it won't work.

Offline lt-m-grow

  • Trad Bowhunter
  • **
  • Posts: 1252
Re: Mechanical release....
« Reply #5 on: June 20, 2016, 03:23:00 PM »
I would try one of these  http://www.carterenterprises.com/releases/thumb-trigger

or these  http://www.carterenterprises.com/releases/resitance-activated

They both are held and shot perpendicular to the string.

Offline arrowslinger22

  • Trad Bowhunter
  • **
  • Posts: 248
Re: Mechanical release....
« Reply #6 on: June 20, 2016, 03:49:00 PM »
I have one of the Wynn relax trigger releases that I would give you if you want to try it.
Only when the last tree has died
and the last river been poisoned
and the last fish been caught
will we realize that we cannot eat money

Offline Shadowhnter

  • Trad Bowhunter
  • **
  • Posts: 1045
Re: Mechanical release....
« Reply #7 on: June 20, 2016, 09:15:00 PM »
Have you considered a shooters thumb ring? If you can get your thumb around the string and catch your thumb with your index finger to help hold pressure, it might work for you.

Offline damascusdave

  • Trad Bowhunter
  • **
  • Posts: 3273
Re: Mechanical release....
« Reply #8 on: June 21, 2016, 04:04:00 AM »
Quote
Originally posted by arrowslinger22:
I have one of the Wynn relax trigger releases that I would give you if you want to try it.
X2...I sent you a pm...I was just in Calgary on the weekend shooting at the Calgary Archery Center...I will probably be hitting Calgary Harley Davidson soon and we could meet so I could give it to you...unless, of course, you are no longer in Cowtown
I set out a while ago to reduce my herd of 40 bows...And I am finally down to 42

Offline damascusdave

  • Trad Bowhunter
  • **
  • Posts: 3273
Re: Mechanical release....
« Reply #9 on: June 21, 2016, 04:09:00 AM »
I was just giving this some more thought and I remembered the head of the release actually swivels over quite a range...I would guarantee that you can make it work...as I recall the instructions that came with my first one suggested pinching the trigger between the thumb and index finger as being the best way to use it...very little pressure is required to do that...what Winn will tell you is that the head was called a C12 and they discontinued it due to lack of sales quite some time ago

DDave
I set out a while ago to reduce my herd of 40 bows...And I am finally down to 42

Offline damascusdave

  • Trad Bowhunter
  • **
  • Posts: 3273
Re: Mechanical release....
« Reply #10 on: June 21, 2016, 04:42:00 AM »
And of course the other thing they will tell you, now that I have actually checked out their website, is that they have reintroduced the C12 plus added a hook version...somewhere in all that choice you are going to be very pleased

DDave
I set out a while ago to reduce my herd of 40 bows...And I am finally down to 42

Offline Jakeemt

  • Trad Bowhunter
  • **
  • Posts: 858
Re: Mechanical release....
« Reply #11 on: June 21, 2016, 08:53:00 AM »
If you check a web site called primitive pathways the fellow there has a rather unique release. If I remember right he has some sort of joint disease and cannot hold the bow weight with his fingers so her uses a thumb ring and a large d-loop tied to the string. You might give it a try.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©