Africa!


Contribute to Trad Gang
Become a Trad Gang Sponsor


Author Topic: sharpening 2 blade heads?  (Read 1091 times)

Offline jrchambers

  • Trad Bowhunter
  • **
  • Posts: 966
sharpening 2 blade heads?
« on: March 13, 2006, 02:58:00 PM »
i jsut purchases stos 145 two blade heads. i sharpened them with a filet kife diamond steel and a ceramic rod.  the edges  came out shaving all the way to the tip but the tip is not that pointy it starts to round a little to resemble a tanto tip they are still shaving sharp all the way around.  i was wondering if the point becoming a steeper angle would hurt penitration or it would help with strenght, or neither?

Offline ky_longbow

  • Trad Bowhunter
  • **
  • Posts: 65
Re: sharpening 2 blade heads?
« Reply #1 on: March 13, 2006, 07:18:00 PM »
if anything it will strengthen the head-i knock the tip back a little on my stos- do a search on "STOS" on powwow and you will see about everyone that uses them takes the tip down........
if your not living on the edge,your taking up too much room!!
MEMBER-K.T.B.A.

Offline Wyobowbender

  • Trad Bowhunter
  • **
  • Posts: 1
Re: sharpening 2 blade heads?
« Reply #2 on: March 15, 2006, 03:56:00 AM »
jr...Take a peek @ the latest Ashby studies @ the lin k from the main page....It's EXACTLY the right thing to do !!  Bowbender

Offline daveinthebush

  • Trad Bowhunter
  • **
  • Posts: 3
Re: sharpening 2 blade heads?
« Reply #3 on: March 26, 2006, 02:00:00 AM »
Try a Lansky knife sharpener with diamond hones. The knife holder will hold the broadheads and try for a 22 degree cut on the broadheads.

It comes in hand for sharpening knifes too!
Ok, so my first bear was with a bow with cables! It was still over 7'.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©