INFO: Trad Archery for Bowhunters



Author Topic: Quiver question  (Read 980 times)

Offline billy shipp

  • Trad Bowhunter
  • **
  • Posts: 1159
Quiver question
« on: July 07, 2008, 02:41:00 PM »
I recently bought a 64 Kodiak reproduction that has 1 quiver bushing below the grip....what quiver fit this bow, and where can i find one...anyone have one they want to part with?
This is a left handed bow. Is this type quiver interchangable, or do i need to look for a left hand quiver?

Offline kurtbel5

  • Trad Bowhunter
  • **
  • Posts: 905
Re: Quiver question
« Reply #1 on: July 07, 2008, 04:16:00 PM »
I can't help you Billy, but who made your bow?
              Kurt

Offline billy shipp

  • Trad Bowhunter
  • **
  • Posts: 1159
Re: Quiver question
« Reply #2 on: July 07, 2008, 04:44:00 PM »
Kurt....the bow was built by Mike StJohn

Offline billy shipp

  • Trad Bowhunter
  • **
  • Posts: 1159
Re: Quiver question
« Reply #3 on: July 07, 2008, 05:04:00 PM »
Thanks Jack....holler at me if you run across the left hand model.

Billy

Offline billy shipp

  • Trad Bowhunter
  • **
  • Posts: 1159
Re: Quiver question
« Reply #4 on: July 07, 2008, 05:23:00 PM »
Jack. The bushing is in the side of the riser...no bolt in place....only the bushing, which is countersunk 3/16"

Offline raghorn

  • Trad Bowhunter
  • **
  • Posts: 865
Re: Quiver question
« Reply #5 on: July 07, 2008, 06:41:00 PM »
Billy,
If Jack can't find his quiver contact me.
This is a picture of a 4 arrow right hand. The lefty will be opposite and of course there is an eight arrow model.
 

Offline PAPALAPIN

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2642
Re: Quiver question
« Reply #6 on: July 08, 2008, 07:56:00 AM »
That's th Convert-a-quiver.  

If the insert is in the side, this is what you need, no adapter.

I will try to look for it tonight
JACK MILLET-TBG,TGMM Family of the Bow


"Don't worry about tomorrow.  If the sun doesn't come up in the morning, we will play in the dark" - ME

The most important part of your hunting setup is the broadhead.  The rest is just the delivery system.

Offline Ken Sorg

  • Trad Bowhunter
  • **
  • Posts: 232
Re: Quiver question
« Reply #7 on: July 08, 2008, 08:25:00 AM »
If no one can help you out here Billy, I can get you one that has never been used.

Offline PAPALAPIN

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2642
Re: Quiver question
« Reply #8 on: July 08, 2008, 09:06:00 PM »
OK

I found my lefty quiver, but it is a double arm.  Really good shape with pretty new looking foam.

It will work on your '64 repro, but I gotta tell ya, double arm Bear quivers tend to mar up the finish on the limbs.  They will make rub marks.

Not as bad a probelm with the convert-a-quiver like Raghorn posted.

They were made in three lengths; long, medium, and short.  There is a certain amout of adjust ment to the upper spring arm only.  Short is for mows like a Kodiak Magnum, mediums are for bows like Kodiaks, longs are for bows like Kodiak Specials.

Mine seems to be a medium, which would be right for your bow.

I don't care if I sell it or not.  If I were you, I would watch e8ay for a while to see if you can nail a lefty convert-a-quiver, or see if you can make a deal with Raghorn.  Failing all that, mine is here if you want it.

I feel that $35.00 + shipping is fair if that is acceptable to you.  Raghorn may go cheaper, or you might get luckey on E8ay;  f you go to e8ay pay attention to right or left hand.  I didn't and that's how I ended up with the lefty.  Since your insert is on the side, you won't need the adapter.  You should be able to get the bolt from 3Rivers, or maybe Bear Archery (Escalade Sports)
JACK MILLET-TBG,TGMM Family of the Bow


"Don't worry about tomorrow.  If the sun doesn't come up in the morning, we will play in the dark" - ME

The most important part of your hunting setup is the broadhead.  The rest is just the delivery system.

Offline raghorn

  • Trad Bowhunter
  • **
  • Posts: 865
Re: Quiver question
« Reply #9 on: July 08, 2008, 09:13:00 PM »
Jack,
Is your lefty a 8 arrow?

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©